NTEC 2014 FS/WTB thread (LOCALS ONLY!)
sigh
F/S Elemental Designs 13AV.2 Subwoofer, Elemental Designs Vented Box, Soundstream Rubicon 1600.1 Monoblock amp
Very powerful combo, instantly add insane low end to any system. This system will flex the roof of your car, pound the back of your seats, and rumble the hell out of your floor pan.
Due to its size, I am not able to ship unless buyer is willing to cover expenses. Demo available.
Asking $500.00
If buyer pays full asking price, I will include ALL cables, couplers and fittings.
F/S Elemental Designs 13AV.2 Subwoofer, Elemental Designs Vented Box, Soundstream Rubicon 1600.1 Monoblock amp
Very powerful combo, instantly add insane low end to any system. This system will flex the roof of your car, pound the back of your seats, and rumble the hell out of your floor pan.
Due to its size, I am not able to ship unless buyer is willing to cover expenses. Demo available.
Asking $500.00
If buyer pays full asking price, I will include ALL cables, couplers and fittings.
Cobb Lowering springs - $300
This is a discontinued product you wont find these any where else! These are BRAND NEW 0 mi still in the box and wrapping Lowering springs. Lowers the front by 1 5/16" and rear 1 3/8"
They are 10% stiffer than stock. Will work with stock struts. They are manufactured by Eibach with Cobb's specification.


Evo X LICP - $200 BRAND NEW 0 Miles on it Still have all the clamps and connectors.

Cobb Access Port - $450 It was uninstalled from my Evo X before I sold it. So it is good to go!
I have both cables. As well.

This is a discontinued product you wont find these any where else! These are BRAND NEW 0 mi still in the box and wrapping Lowering springs. Lowers the front by 1 5/16" and rear 1 3/8"
They are 10% stiffer than stock. Will work with stock struts. They are manufactured by Eibach with Cobb's specification.


Evo X LICP - $200 BRAND NEW 0 Miles on it Still have all the clamps and connectors.

Cobb Access Port - $450 It was uninstalled from my Evo X before I sold it. So it is good to go!
I have both cables. As well.

WTB- Looking for any and all aftermarket goodies for an Evo 8 (Minus exhaust parts)... Just picked up a close to stock 03 a few days ago. Let me know what you've got via PM or text. 469-236-one two zero 3.
wtb: evo 8 or 9 coilovers.nothing less than 10k springrates pls. Prefer w/ adjustable bound(bump) and rebound, & independent ride height adjustment. Need camber plates. even if you dont got it all, offer what ya got anyways.
Last edited by chad99evo; Dec 13, 2012 at 02:09 AM.
Located in euless texas, i have a edfc setup for sale. one of the motors has the wires severed from the harness, but there is enough of it there that it can be fixed. the control box has some adhesive residue on it from the velcro it had when i bought it. no real biggie.
They are for Tein Flex Coilovers
selling for 150 obo


They are for Tein Flex Coilovers
selling for 150 obo


4x Hankook Ventus EVO V12 Tires. 255/40/17 Good tread. 2 have a little inside camber wear from my BMW.
$150 picked up. In Royse City. I can meet you a little closer to Dallas.
$150 picked up. In Royse City. I can meet you a little closer to Dallas.
Last edited by aggieEVO; Nov 30, 2012 at 09:52 AM.
Thread Starter
Evolved Member
iTrader: (49)
Joined: Apr 2007
Posts: 8,970
Likes: 17
From: Prosper, TX
FS: MAP EF2 turbocharger for Evo X
I'm posting this here for to give locals first crack at it. I made 416whp @ Cobb with this turbo on 93-octane pump gas (stock cams). Includes a brand new turbine housing, which can be ported/coated (locally or by MAP) for an extra cost. The compressor housing does include the optional porting. Turbosmart high-pressure billet WGA also included (18psig base, 25psig spring also included).
$1,300 CASH for a local, and you're more than welcome to inspect it pre-purchase if you wish. It will be removed from my car next Friday (12/7/12) by Cobb (they were also the ones to install it).
This picture was taken when brand new, this is not the current WGA or turbine housing:

Here is the current WGA:
I'm posting this here for to give locals first crack at it. I made 416whp @ Cobb with this turbo on 93-octane pump gas (stock cams). Includes a brand new turbine housing, which can be ported/coated (locally or by MAP) for an extra cost. The compressor housing does include the optional porting. Turbosmart high-pressure billet WGA also included (18psig base, 25psig spring also included).
$1,300 CASH for a local, and you're more than welcome to inspect it pre-purchase if you wish. It will be removed from my car next Friday (12/7/12) by Cobb (they were also the ones to install it).
This picture was taken when brand new, this is not the current WGA or turbine housing:

Here is the current WGA:
FS/WTT Used stock X advan tires 245/45/18 have about 5/32 front and about 4-4.5/32 the rear.No patches or plugs $100.00 obo Or if u have anything for an Evo 8 open to anything. Located in Plano
I have 4 used autocross tires with about 80 runs (average 50 seconds per run) on them.
Kumho V710 285/30-18
The shallow tread grooves are just barely worn off but there are still dimples and decent rubber left.
Make me an offer.
Kumho V710 285/30-18
The shallow tread grooves are just barely worn off but there are still dimples and decent rubber left.
Make me an offer.
Last edited by Evo_Someday; Dec 6, 2012 at 08:58 AM.
Anyone have a TB VIII trunk and/or wing for sale locally? Need then in good shape. My trunk is okay, but has some etching where the badges used to be. My wing needs recleared and could use some paint. Hoping to just find replacements for a bit cheaper.
Want to trade my evo 8 SSL seats for evo 9 seats. Front seats have some fade in the leather, back seats are in good condition, door cards are good, pictures upon request. Willing to add money on top if necessary. LMK
If anyone have any interest for any part on my car, shoot me a PM. You must have a 100% perfect, working stock part ready to replace it, plus cash. I'm willing to take any and all reasonable trades. The car will be put back to stock and then sold. All parts have 14k miles on them and are still fully functional, still on my car that is daily driven.
This applies to any and all parts:
BR Double Pumper (need full hanger/pump swap)
FIC 1450 Injectors
Zeitronix integrated with CF panel in middle console with Oil Pressure, Fuel Pressure, EGT, and Wideband AFR sensors. (sale only, make an offer)
Buschur Racing Exhaust
Straight Cat-Delete Pipe
MAP o2 Dump Housing for FP Black
FP Black - Journal Bearing (Must trade for Evo 9 turbo)
MAP Ported Exhaust Manifold
English Racing/GSC "R2" Cams for 2.4/Black Combo
MAP Rev2 Intake Manifold
English Racing 4" SD Intake with 9" K&N Air Filter (for sale only, $100)
ETS 3.5" Intercooler
ETS UICP and LICP
Shep 5-Speed Ultimate Ratio (must have grind free stock 5 speed)
XXR 527 18x9.75 +20 wrapped in 245/35/18 BF Goodrich KDW 2 (Less than 5k miles on them, 70% tread left, would prefer stock BBS wheels from 8/9 MR)
Racing Break 2-Piece Open Slot Front Rotors (less than 500 miles on them)
CL RC6 Track Pads (90% life left, for sale only, make an offer)
Torque Solutions front Motor Mount
Ciro Design Racing Camber/Caster Plates (for sale only, been on the car 2 weeks, $250)
I'm sure there's quite a bit I'm missing. I'm most likely leaving the ported head and 2.4L block in the car unless someone highly motivates me for a swap. PM with any questions.
-Acree
This applies to any and all parts:
BR Double Pumper (need full hanger/pump swap)
FIC 1450 Injectors
Zeitronix integrated with CF panel in middle console with Oil Pressure, Fuel Pressure, EGT, and Wideband AFR sensors. (sale only, make an offer)
Buschur Racing Exhaust
Straight Cat-Delete Pipe
MAP o2 Dump Housing for FP Black
FP Black - Journal Bearing (Must trade for Evo 9 turbo)
MAP Ported Exhaust Manifold
English Racing/GSC "R2" Cams for 2.4/Black Combo
MAP Rev2 Intake Manifold
English Racing 4" SD Intake with 9" K&N Air Filter (for sale only, $100)
ETS 3.5" Intercooler
ETS UICP and LICP
Shep 5-Speed Ultimate Ratio (must have grind free stock 5 speed)
XXR 527 18x9.75 +20 wrapped in 245/35/18 BF Goodrich KDW 2 (Less than 5k miles on them, 70% tread left, would prefer stock BBS wheels from 8/9 MR)
Racing Break 2-Piece Open Slot Front Rotors (less than 500 miles on them)
CL RC6 Track Pads (90% life left, for sale only, make an offer)
Torque Solutions front Motor Mount
Ciro Design Racing Camber/Caster Plates (for sale only, been on the car 2 weeks, $250)
I'm sure there's quite a bit I'm missing. I'm most likely leaving the ported head and 2.4L block in the car unless someone highly motivates me for a swap. PM with any questions.
-Acree
Last edited by Acree; Dec 19, 2012 at 10:22 AM.
Hey guys I have a few things up for sale that are just laying around the house.
T1R UICP (a few scraches and dings)- $80

Alpine 4 channel AMP (MRP-F250)- $100






Auto Meter Boost and A/F Ratio- Make an offer


T1R UICP (a few scraches and dings)- $80

Alpine 4 channel AMP (MRP-F250)- $100






Auto Meter Boost and A/F Ratio- Make an offer









