WTB: CZ4A (2008+ Lancer/Evo) 6-disc changer w/ faceplate

 

I am considering selling my super lightweight white RPF1s 17X9.5

EDIT: I'VE DECIDED TO KEEP THEM FOR NOW.

 

I am putting my EVO up for sale. I cant afford to keep this car and race the X any more so something has to go. The car runs and drives great. I would have no problem jumping in it and driving across state with it. The car does not have AC any more since I have a forward racing turbo kit. Kevin D tuned the car and its running on E85. The out side of the car does have rock chips and some scrapes 6 out of 10. Inside is clean 8/10. I will not part the car out or sell anything off the car. $19.5K OBO I have add a few pics, If you would like more please E-mail me or Pm me and let me know what you want.
JoshLSmith79@gmail.com

2003 EVO 8
123567 on the car
Motor & turbo kit have 3800k
Trans and coliovers have 12 miles on them.

BR 2.0
BR stage 3 head
BF 272 cams
Header was built by Jessie B
FP HTA 35/86
BR v ban Exhaust one strait pipe one with muffler
BR front light weight cross member
BR rear side aluminum diff bushings and mustache bar
Br drive shaft loop
AWD motorsports Aluminum Drive shaft
BR upper and lower intercooler pipes
BR race intercooler
AMS small brake kit
Min battery
BR dubble pumper
1650 injectors
BR min radiator
AMS VSR intake with 65mm TB



Sparco Harness bar
Zetronix Wideband and boost gage
Raptor shift light.


17x8.5 i think RPF1's with nitto Drags


Shep built trans, longer first gear. I had everything done to the trans except the 4.10 final drive
Shep built T case with quaffie
Quarter Master twin clutch
AWD Motor Sports D2 coilovers.
Carbon Fiber Trunk

I know there are more parts and I will update the list as I think of everything.

Thanks
Josh

 

Just a reminder that EvoM classifieds forum usage rules apply in NTEC.

 

updated!!

 

FS: Buschur racing cast 35r looking to get 1400 plus stock 9 setup.

will get pics up tomo.

 

FS:Selling my rexpeed ralliart replicia cf lip off my evo 9. looking to get 200 picked up..

there are some rock chips but other than that its in good conition

ill get some pics when i get off work

 

parts in good condition,all parts are OBO and will shipped
just message me on parts u are interested...
stock evo8 intercooler $100 shipped
aftermarket uicp (previous owner said its injen,not sure) w/ couplers 110 shipped
stock lower mount w/ powerflex 30 shipped
stock injectors 100 shipped
all other stock parts shoot me an offer...







parts located in dallas texas...thanks
ron

 

80.00 picked up, 85.00 shipped never mounted all parts included for install.

 

WTB EVO IX or 05 VIII, looking for WW or GG preferably, must be under 75k miles on car/odo

Thanks

 

I have the complete AMS/Wilwood light weight front brake kit for sale. I will include 2 sets of pads (one set new in box). Pics available upon request. Price is $950 obo and I can help instal them for you. Here is the link to the kit on the AMS website:

http://www.amsperformance.com/cart/a...kit-front.html

The AMS/Wilwood EVO X Lightweight Brake Kit was designed for the Drag racer or Autocrosser looking for that extra edge. AMS has teamed up with Wilwood to provide this lightweight yet streetable kit that shaves 32 lbs from your EVO, 22 of which is reduced from the rotating mass! Less weight (sprung & rotational) means quicker acceleration, less parts breakage, and quicker suspension response.

Using a robust Wilwood forged 4 piston caliper, this kit retains great stopping power making it very streetable. The vented vane rotor is 11.75” in diameter (stock is 12.75”) and features a lightweight aluminum hat. We supply the rotor and hat pre-assembled with safety wire and include Goodridge braided stainless steel brake lines. Grade 8 hardware and aluminum caliper brackets complete the package. This kit is designed to fit over 15” rims with the appropriate wheel spacers.

This is the same kit we developed and use on our World Record Holding, 1130awhp EVO VIII which has hauled us down from over 170mph drag passes! This kit is a far superior and a much safer alternative to using older EVO RS brakes or adapting other single/dual piston Mitsubishi calipers.

Features
32lbs. of weight savings, 22lbs. of which is reduced from rotating mass!
Aluminum hat rotors come assembled, pre-torqued and safety wired
Heavy-duty Grade 8 hardware
Comes with everything needed for install
Direct bolt-on, no modifications needed
Kit Includes
Wilwood forged 4-piston caliper
Wilwood brake pads – BP-10 medium friction “Smart Pad”
Aluminum caliper adapter brackets
Grade 8 hardware
Street/Track 11.75” vented rotors & aluminum hats (assembled & safety wired)
Goodridge S.S. braided high performance brake lines & fittings.
Specifications
Willwood forged superlight 4 piston caliper
Grade 8 hardware
11.75" diameter, solid vented rotors
Fits 15" rims with appropriate wheel spacers
D.O.T Complaint and T.U.V approved brake lines
6061 Aluminum machined brackets
Applications
Mitsubishi Evolution 10
Fits all USDM, JDM and European Models

 

pics added here:

https://www.evolutionm.net/forums/sa...ml#post9282290

 

FS: AMB transponder, rechargeable version.

$250



WTB:
CHEAP car stereo. Would prefer with a remote. USB or aux in as well.

 

I got a couple of things for sale now that the SE is gone.

Evo X Cobb Accessport - $300
ATTN: Screen is dark and twice it hasn't come on once plugged in. A quick shake and plug it back in and it works. That's why the price is low. Cobb can replace the screen but it is not covered under warranty. Previous owner had already removed the sticker trying to fix the screen. Works great except for the screen issue. 100% unmaried.



Evo X Test Pipe - $100 (*Kracka edit* Ichiba brand)
I can't remember the mfg. but I got this from Kracka so he can probably tell you. I never got around to installing it.

 

Wtb: stock Gsr struts/ suspension.