Notices
Northeast Region Includes CT, MA, ME, NH, NJ, NY, PA, RI, VT.

Body Shop in NE for Sanding and Re-Clearing Wing

Thread Tools
 
Search this Thread
 
Old Nov 5, 2008 | 04:15 PM
  #1  
redcat's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jan 2004
Posts: 201
Likes: 24
From: North Georgia
Body Shop in NE for Sanding and Re-Clearing Wing

Who in the northeast has had their VIII wing sanded and re-cleared, where did you get it done and how much did it cost? I saw Ultimate Collision Center can do this, but they are a bit of a drive at a couple of hours from Hartford, CT.

Local Mitsu dealership would not touch it. It's really not that bad off.

Also, I have seen the DIY instructions, but would prefer to get this done professionally.
Reply
Old Nov 5, 2008 | 05:20 PM
  #2  
Hmoneybagz's Avatar
Evolving Member
iTrader: (1)
 
Joined: Jan 2006
Posts: 214
Likes: 0
From: New Jersey
I did it myself. I prob spent less than $10 for everything. Clear coat and sand paper. Its easy to do
Reply
Old Nov 5, 2008 | 05:22 PM
  #3  
itzcharlez's Avatar
Evolving Member
iTrader: (4)
 
Joined: Feb 2007
Posts: 369
Likes: 1
From: new york
DIY = save moneyyy
Reply
Old Nov 5, 2008 | 07:18 PM
  #4  
mifesto's Avatar
Evolved Member
iTrader: (58)
 
Joined: Dec 2003
Posts: 3,119
Likes: 0
From: Princeton, NJ
i'd also like to know.. maybe somewhere to NJ?
Reply
Old Nov 6, 2008 | 04:06 AM
  #5  
redcat's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jan 2004
Posts: 201
Likes: 24
From: North Georgia
Thanks for the input / advice.

But, having just fixed the stuck heater knob and sunroof motor on my ‘03, I can say I am more of a mechanical guy. I’ve done some minor Bondo work over the years and was never really happy about the way it turned out. For the $150 or so I think this is going to cost to bring the wing back, it’s (I still think) worth it to me to make sure it gets done right.
Reply
Old Nov 6, 2008 | 08:32 PM
  #6  
EatSleepBoost's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jan 2008
Posts: 971
Likes: 0
From: Mass
ur not close enough to me but i work at a dealer on the mass/nh boarder. i brought my wing in this week and had my buddy over at the body shop sand and clear mine. clearing was done in the booth. 2 coats. came out great.
Reply
Old Nov 7, 2008 | 05:51 AM
  #7  
redcat's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jan 2004
Posts: 201
Likes: 24
From: North Georgia
^ Keene or Nashua?
Reply
Old Nov 7, 2008 | 11:47 AM
  #8  
EatSleepBoost's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jan 2008
Posts: 971
Likes: 0
From: Mass
nashua
Reply
Old Nov 7, 2008 | 11:48 AM
  #9  
EatSleepBoost's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jan 2008
Posts: 971
Likes: 0
From: Mass
any local body-shop should be able to hook u up. just take it off and bring it in, say u need just the top wetsanded then re-cleared with 2 coats
Reply
Old Nov 9, 2008 | 01:23 PM
  #10  
Evan311's Avatar
Evolving Member
iTrader: (3)
 
Joined: Jun 2008
Posts: 111
Likes: 0
From: New Jersey
atx motorsports in bergenfield nj does great body and performance work
Reply
Old Nov 11, 2008 | 03:21 PM
  #11  
mifesto's Avatar
Evolved Member
iTrader: (58)
 
Joined: Dec 2003
Posts: 3,119
Likes: 0
From: Princeton, NJ
evan311, how much they charge u?
Reply
Old Nov 11, 2008 | 03:39 PM
  #12  
EatSleepBoost's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jan 2008
Posts: 971
Likes: 0
From: Mass
hes had a 9 sec car built there, i doubt he has had the need to have a factory wing cleared. just give atx a call. i have never heard anything negative about them. im sure u will be satisfied.
Reply
Old Nov 13, 2008 | 04:30 PM
  #13  
SupaDoopa's Avatar
Newbie
 
Joined: Aug 2008
Posts: 83
Likes: 0
From: 508CARTEL
I actually got my 2005 EVO8's wing warrantied. I guess it's a good thing being a salesman and all the techs loving the **** out of you. w00t!

But, I've seen it done DIY style and come out pretty close to perfect if the time is taken.
Reply
Old Nov 13, 2008 | 05:03 PM
  #14  
damagedone27's Avatar
Newbie
iTrader: (2)
 
Joined: Mar 2007
Posts: 65
Likes: 0
From: CT
I hand mine done at My Way Auto Body in stamford - did a great job it cost 150 and the turn around time was like 2-3 days
Reply
Old Nov 14, 2008 | 02:36 PM
  #15  
redcat's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jan 2004
Posts: 201
Likes: 24
From: North Georgia
They're not too far. I'll check them out. Thanks.
Reply



All times are GMT -7. The time now is 12:31 AM.