Oh... Well the +18 doesnt need spacers in the front... They will fit but they might rub depending on tire size and drop... But... The +18 isnt too bad in the rear.

 

slot 23, 24 are empty and there is an empty slot above 20

 

dfghdsfhsdfhs

 

Yep, +38..

I need a 20 in the front to clear the caliper and maybe a small spacer in the rear just for looks. Im not sure how far out they are going to be. I also need to figure out a tire size. It seems most run a 255 but that's a little skinny for a 9.5" lol I am thinking minimum 265 .. might try for 275's, need to see what's involved.

 

be prepared to scrape everywhere. 255 is perfect... trust me. you will have to do a fender roll in the rear either way... IM NO EXPERT ON THIS... i just know what id do... because those are the enkeis i would want as my beater setup

 

^ what do you mean scrape everywhere?

 

My boy with the white ralliart does fender rolling with an actual roller. Hes rolled mine and hes done all the work on his car including flaring and rolling. The 255 will be fine but you will cut up the tire going over bumps or if you have weight in the back. Facking A I had 20mm spacers forever that I was trying to sell and I just recently got rid of :/

 

Im going to have to do something, my fender lips are pretty rusty. Not sure what will happen with rolling in there current state. Im trying to find a donor shell to get new sheet metal to weld in.. whada bummer on them spacers...lol

 

Dont worry matt... I got you. Im sending my car for some rear quarter work... If you want we can both go!

 

Sounds good to me. Let me know when your going. Going on lunch break today to pick up the wheels.

 

 

Second mod FTW lol, congrats on the new wheels

 

Lmao ! Thanks
These would actually be the fourth !

 

mmmmm ...wheels look sweet as fack

 

I love rpf-1s