Notices
Mark this thread as Unsold

FS: Stock IX MR parts

Thread Tools
 
Search this Thread
 
Old Aug 28, 2007 | 03:32 PM
  #1  
Vostok 7's Avatar
Thread Starter
Evolved Member
iTrader: (13)
 
Joined: Jun 2007
Posts: 676
Likes: 0
From: Washington State
FS: Stock IX MR parts

Well, I got Robispec'd so the stock stuff has got to go.

Pictures coming soon!

Set of stock IX MR Bilstien struts and springs. Great upgrade from the standard equipment on the non-MR. Pairs great with a set of aftermarket springs. Struts are in perfect shape (checked out by Robi!) with about 17k miles on them when they came off. No oil leakage or anything. No top hats included. $650 local pick up.



Set of 4 stock MR FORGED BBS wheels in Gunmetal. These are great wheels, but I have a sponsorship with Enkei so I had to run their stuff. The wheels have been curbed a few times by the previous owner of the car. I will get pictures soon. One of the wheels has been repainted and I can have all of them repainted to match. The repainted one looks the same (it was color matched), but doesn't show the curb rash and was clear coated so it looks slightly different. They are 17x8 +38 with Kuhmo Ecsta ASX All-Season tires on them. The tires only have about 2500-3000 miles on them. As good as sold.

Stock IX MR rear wing, Wicked White/CF with Gurney Flap. Near perfect shape! $350





Stock IX Evo Brembos. Includes front and rear calipers, Axis Ceramic front pads that are brand new, no more than 1500 miles on them, and stock rear pads with plenty of life. 4 rotors all in usable shape, 3 of the 4 have "lips" around the edge, one of the rear ones looks like it was replaced. All have plenty of life left. Calipers are in good condition with some minor cosmetic damage (scrapes and scuffs in the paint). They are not pink. 17k miles total on the set. SOLD

Stock Evo front cross bars. Not much to say about these. $50 shipped

Stock Evo IX intake pipe. $100 shipped

Stock Evo IX intake box. $100 shipped

Stock Evo catback. $125 shipped

Stock Evo header. $125 shipped Get it for porting for no down time!

Stock Evo O2 housing. $75 shipped

Stock Evo IX downpipe. $75 shipped



Stock Evo IX MR rear swaybar. With brackets. Don't know if this is bigger than a standard VIII or IX rear sway. $100 shipped



Stock IX Evo MR rear bumper. I backed in to someone, replaced with JDM MR bumper. All there is is a scuff that would probably come off with a little elbow grease and some polishing compound. $300 local pickup/delivery

Prefer local sale on everything but I am open to shipping if you pay all shipping and packaging costs. Won't be cheap on the wheels.

- Patrick

Last edited by Vostok 7; Oct 8, 2007 at 08:57 PM.
Old Aug 29, 2007 | 03:08 PM
  #2  
edison's Avatar
Evolving Member
iTrader: (9)
 
Joined: Dec 2003
Posts: 497
Likes: 1
From: Bellevue, WA
yo patrick, u got the enkei already? i need pic asap! also get sum pic of the bbs, im lookin for a set of winter rims
Old Aug 29, 2007 | 03:47 PM
  #3  
Vostok 7's Avatar
Thread Starter
Evolved Member
iTrader: (13)
 
Joined: Jun 2007
Posts: 676
Likes: 0
From: Washington State
Originally Posted by edison
yo patrick, u got the enkei already? i need pic asap! also get sum pic of the bbs, im lookin for a set of winter rims
Yeah, I carted 'em down to Reno to get Robispec'd and put them on when he was done. They look HOT. I fit the 275's and everything! I'll be posting pictures soon, I've been moving on top of racing and so all my computers are apart and strewn all over the new house

- Patrick
Old Aug 30, 2007 | 12:44 AM
  #4  
edison's Avatar
Evolving Member
iTrader: (9)
 
Joined: Dec 2003
Posts: 497
Likes: 1
From: Bellevue, WA
Originally Posted by Vostok 7
Yeah, I carted 'em down to Reno to get Robispec'd and put them on when he was done. They look HOT. I fit the 275's and everything! I'll be posting pictures soon, I've been moving on top of racing and so all my computers are apart and strewn all over the new house

- Patrick
dam, robi is suppose to come back to seattle and do a few cars, including mine. i have to check with him to see what he schedule looks like. did you roll your fenders? spacers? i def need to see them 275s in person!!
Old Aug 30, 2007 | 07:41 AM
  #5  
Vostok 7's Avatar
Thread Starter
Evolved Member
iTrader: (13)
 
Joined: Jun 2007
Posts: 676
Likes: 0
From: Washington State
Originally Posted by edison
dam, robi is suppose to come back to seattle and do a few cars, including mine. i have to check with him to see what he schedule looks like. did you roll your fenders? spacers? i def need to see them 275s in person!!
No spacers, rear fenders were hammered by Robi and then he pulled the fronts but didn't roll them.

The only place I get any rub is on the front of the side skirt going in reverse when turning, but that is extremely light.

- Patrick
Old Aug 30, 2007 | 05:10 PM
  #6  
edison's Avatar
Evolving Member
iTrader: (9)
 
Joined: Dec 2003
Posts: 497
Likes: 1
From: Bellevue, WA
Originally Posted by Vostok 7
No spacers, rear fenders were hammered by Robi and then he pulled the fronts but didn't roll them.

The only place I get any rub is on the front of the side skirt going in reverse when turning, but that is extremely light.

- Patrick
im gonna need to see it to believe it, theres a slight chance i might jack the rims along with the 275s
Old Aug 30, 2007 | 05:22 PM
  #7  
RobDogg's Avatar
Account Disabled
iTrader: (2)
 
Joined: Dec 2005
Posts: 347
Likes: 0
From: San Diego
Originally Posted by Vostok 7
No spacers, rear fenders were hammered by Robi and then he pulled the fronts but didn't roll them.

- Patrick
Hammered he hammered my car too.. looked like azz.. then my wheel flew off
Then the guy swore up and down he took care me to save face.. Lied about who tightened the lugs on top of everything... i should have sued him..
Old Aug 30, 2007 | 11:33 PM
  #8  
edison's Avatar
Evolving Member
iTrader: (9)
 
Joined: Dec 2003
Posts: 497
Likes: 1
From: Bellevue, WA
Originally Posted by RobDogg
Hammered he hammered my car too.. looked like azz.. then my wheel flew off
Then the guy swore up and down he took care me to save face.. Lied about who tightened the lugs on top of everything... i should have sued him..
wow, sucks that u had such a bad experience with bob. im sure theres a mistunderstanding, im sure hes willing to take the extra steps to make sure his customers are happy
Old Aug 31, 2007 | 10:31 AM
  #9  
Vostok 7's Avatar
Thread Starter
Evolved Member
iTrader: (13)
 
Joined: Jun 2007
Posts: 676
Likes: 0
From: Washington State
I did't start this thread to discuss if Robispec is any good or not, I started it to sell stuff.

Thanks.

- Patrick
Old Aug 31, 2007 | 03:55 PM
  #10  
RobDogg's Avatar
Account Disabled
iTrader: (2)
 
Joined: Dec 2005
Posts: 347
Likes: 0
From: San Diego
The word "Hammered" really rung a bell with me...
sorry to thread jack





Fan Boy
Old Sep 1, 2007 | 01:59 AM
  #11  
Vostok 7's Avatar
Thread Starter
Evolved Member
iTrader: (13)
 
Joined: Jun 2007
Posts: 676
Likes: 0
From: Washington State
Originally Posted by RobDogg
Fan Boy


- Patrick
Old Sep 6, 2007 | 01:59 PM
  #12  
Vostok 7's Avatar
Thread Starter
Evolved Member
iTrader: (13)
 
Joined: Jun 2007
Posts: 676
Likes: 0
From: Washington State
Well, since no ones biting here and would rather just criticize my suspension choices, this stuff is all going on Craigslist as soon as I get pictures.

- Patrick
Old Sep 6, 2007 | 09:13 PM
  #13  
k3lv's Avatar
Evolved Member
iTrader: (12)
 
Joined: Feb 2006
Posts: 1,736
Likes: 0
From: Vancouver
Hi Vostok,

What sized tires are the Kumho Escta that come with the BBS? I'm very interested the BBS(I'd drive down from Vancouver, Canada, depending where you are I only know how to get to Bellisfair Mall in Bellingham).

Thanks

-Kelvin
Old Sep 6, 2007 | 11:12 PM
  #14  
Vostok 7's Avatar
Thread Starter
Evolved Member
iTrader: (13)
 
Joined: Jun 2007
Posts: 676
Likes: 0
From: Washington State
Originally Posted by k3lv
Hi Vostok,

What sized tires are the Kumho Escta that come with the BBS? I'm very interested the BBS(I'd drive down from Vancouver, Canada, depending where you are I only know how to get to Bellisfair Mall in Bellingham).

Thanks

-Kelvin
They are Kumho Ecsta ASX All-Season in stock size, 235/45R17.

As far as driving down, I'm about 5-6 hours from Vancouver, Canada We could meet somewhere in the middle. Bellingham is still quite a drive for me (about 3-4hrs) but I could try to make it if you're that serious!

Let me know! I'll get pictures of them posted up soon. I posted them on Craigslist as well now.

- Patrick
Old Sep 7, 2007 | 12:44 AM
  #15  
edison's Avatar
Evolving Member
iTrader: (9)
 
Joined: Dec 2003
Posts: 497
Likes: 1
From: Bellevue, WA
Originally Posted by Vostok 7
They are Kumho Ecsta ASX All-Season in stock size, 235/45R17.

As far as driving down, I'm about 5-6 hours from Vancouver, Canada We could meet somewhere in the middle. Bellingham is still quite a drive for me (about 3-4hrs) but I could try to make it if you're that serious!

Let me know! I'll get pictures of them posted up soon. I posted them on Craigslist as well now.

- Patrick
i might head up to vancouver again, i wanna check out the nightmarket before it close. let me know if the deal is firm up, i dont mind delievering them to richmond



All times are GMT -7. The time now is 02:24 PM.