Good news and Bad news....
Thread Starter
Evolved Member
iTrader: (10)
Joined: Oct 2003
Posts: 2,036
Likes: 0
From: Tacoma, Washington
welll im on budget... im try find good deal on used and rebuild T-case at Shep or English racing...
that pretty suck... but my Tranny is fine and it good.. nothing wrong..
thanks guys for support.. i would go back and work my *** off to get 11s goal
that pretty suck... but my Tranny is fine and it good.. nothing wrong..
thanks guys for support.. i would go back and work my *** off to get 11s goal
Yea you shouldn't have no problems hitting 11's Chris. Its weird though you busted your TC as your hp level. Next time I might lower you 2step and make sure your tire pressures are good. With that new clutch of yours you really need to be careful launching. Twindisk will tear everything up if not launched just right. GL on getting a new transfer case. I now know why I rarely launch my car...
Thread Starter
Evolved Member
iTrader: (10)
Joined: Oct 2003
Posts: 2,036
Likes: 0
From: Tacoma, Washington
i guess i was too hard Drop clutch at 6300 2 step.., i should go back at 6000 lol..
so i able to get 05 to 04 T case is ok? and 03?? i think 03 cant beacsue it non acd?
or i have to get 06 IX model T-case..
so i able to get 05 to 04 T case is ok? and 03?? i think 03 cant beacsue it non acd?
or i have to get 06 IX model T-case..
welll im on budget... im try find good deal on used and rebuild T-case at Shep or English racing...
that pretty suck... but my Tranny is fine and it good.. nothing wrong..
thanks guys for support.. i would go back and work my *** off to get 11s goal
that pretty suck... but my Tranny is fine and it good.. nothing wrong..
thanks guys for support.. i would go back and work my *** off to get 11s goal
Thread Starter
Evolved Member
iTrader: (10)
Joined: Oct 2003
Posts: 2,036
Likes: 0
From: Tacoma, Washington
i have alot list that i need
1. New or used then rebuild Tcase
2. 4 new tires
3. Alignment (metalmellinium cousin's Bob shop)
then turn down 2 step rev to 6000 then dyno n tuned again,
1. New or used then rebuild Tcase
2. 4 new tires
3. Alignment (metalmellinium cousin's Bob shop)
then turn down 2 step rev to 6000 then dyno n tuned again,
I might even lower your 2step to 5600-5800rpm. You should be building enough boost off the line and running stock size tires you shouldn't need your 2step that high. I have launched at 5400 and its still enough to break all 4 loose even with RE01R's.
Thread Starter
Evolved Member
iTrader: (10)
Joined: Oct 2003
Posts: 2,036
Likes: 0
From: Tacoma, Washington
that what my friend say.. i still dont understand.. it hard for me understand the explain of techiques.. i like to someone show me and i see and feel then i learn it..



I would shoot for 1.7 maybe 1.6 60ft times. To hit 1.5 or lower is not easy and takes setup suspenion and usually DOT slicks,