Notices
Northwest Region Includes AK, ID, WY, SD, MT, ND, CO.

Rear strut problems

Thread Tools
 
Search this Thread
 
Old Mar 7, 2010 | 11:07 PM
  #1  
NWEvoViii's Avatar
Thread Starter
Evolving Member
iTrader: (8)
 
Joined: Mar 2007
Posts: 177
Likes: 0
From: Shoreline, Wa
Rear strut problems

I just posted this in the Evo general and suspension section and I'm hoping some locals can help me diagnose this problem I encountered today.

Just installed some Bilstein shocks in the front and rear since my front passenger stock shock blew out on me. Everything went well, or so I assumed until I lowered the car and drove it out of the drive way, then I heard a noise coming from the trunk and a little more driving I heard squeeking. I pop the trunk and see that the metal rod of the strut had shot through the trunk liner and the strut is probably resting on the bump stop.

I don't have a picture of it right now but will take one in the morning. I'm wondering why this happened. I lowered the car before when I put in my Swifts and I did the same process for the Bilsteins.

Was wondering if it was cause of the insulators I used from the stock KYB's since the Bilsteins didn't come with any. To help show what I mean by that, here's a pic from evomoto.



I hope someone knows what I'm talking about and can chime in here. I also hope my struts arn't blown cause of this, I haven't even had them for a week.
Reply




All times are GMT -7. The time now is 01:41 AM.