Mark this thread as Unsold
FS/FT ARC FMIC and Induction box + other stuff
Jul 29, 2010, 04:11 PM
#1
Evolved Member
Thread Starter
iTrader: (34)
Join Date: Aug 2008
Location: WA
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
FS/FT ARC FMIC and Induction box + other stuff (Prices added)
UPDATE:
Ok, now things are settling out with the two cars, I have parts for sale/trade!!
NOTE: Pic's will be up ASAP, most tonight I think. Prices will also go up over the next day or so, and they will take into account that not everything is in perfect condition.
Stuff I have for sale/trade:
ARC FMIC - Keeping for now (due to it being damaged. If someone's still interested, we can talk)
ARC Induction box - Sold!
ARC Shift knob (dull titanium, couple scratches) - Sold!
Weapon-R engine damper - 100
RMR real cf steering column gauge pod for 60mm - 80 (note with this, 70 if we trade OE steering column plastic piece, mines drilled for the pod)
DashDaq XL with Zeitronix Zt-2 wideband (comes with Mazda/Ford extended license, cost 99 bucks) - Sold!
Stuff I need:
IX cf front lip
18x9.5 wheels with tires
cf vortex generator
Tubular exhaust manifold
Hit me with whatever, I'm open to ideas lol
Also, for monetary exchange, I only take cash! Prices OBO.
Ok, now things are settling out with the two cars, I have parts for sale/trade!!
NOTE: Pic's will be up ASAP, most tonight I think. Prices will also go up over the next day or so, and they will take into account that not everything is in perfect condition.
Stuff I have for sale/trade:
ARC FMIC - Keeping for now (due to it being damaged. If someone's still interested, we can talk)
ARC Induction box - Sold!
ARC Shift knob (dull titanium, couple scratches) - Sold!
Weapon-R engine damper - 100
RMR real cf steering column gauge pod for 60mm - 80 (note with this, 70 if we trade OE steering column plastic piece, mines drilled for the pod)
DashDaq XL with Zeitronix Zt-2 wideband (comes with Mazda/Ford extended license, cost 99 bucks) - Sold!
Stuff I need:
IX cf front lip
18x9.5 wheels with tires
cf vortex generator
Tubular exhaust manifold
Hit me with whatever, I'm open to ideas lol
Also, for monetary exchange, I only take cash! Prices OBO.
Last edited by F0RSAKEN; Aug 30, 2010 at 03:27 AM.
GLWS/T, Andrew!
Jul 29, 2010, 08:38 PM
#6
Evolved Member
Thread Starter
iTrader: (34)
Join Date: Aug 2008
Location: WA
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Honestly I have no idea what any of the ARC **** is worth used, so I can't post prices until I figure it out. The best I've seen so far is someone sold an ARC intake box for 200. Again, I'll post prices when I figure it out, but I'd much rather trade for parts I can use.
Jul 29, 2010, 11:48 PM
#7
Evolved Member
iTrader: (55)
Join Date: Aug 2006
Location: Monroe - WA
Posts: 3,282
Likes: 0
Received 0 Likes
on
0 Posts
^I suppose it depends on how quickly you want to move the stuff. I know that when I've sold ARC stuff I would figure I'd get lowballed to about half, or maybe a bit North of that. E.g. - the Ti sparkplug cover, which is an extremely nice piece, I think it retails for like $350 but I couldn't get a single bite at $200, and certainly not higher. As soon as I hit $175 I had offers all over the place.
The IC might go for more cause it is more rare, but likely (since it is no more functional than an Garrett or other ICs) it may go for even less than half. That one really depends on landing a baller cause only freaks pay $2400, or even half that, for an IC! I am pretty sure for $1200 you can get a Garrett core 3.5" or bigger, IC kit (all couplers, upper, and lower pipes) and have Mike even anodize it pink! Okay, maybe not the last part.
The IC might go for more cause it is more rare, but likely (since it is no more functional than an Garrett or other ICs) it may go for even less than half. That one really depends on landing a baller cause only freaks pay $2400, or even half that, for an IC! I am pretty sure for $1200 you can get a Garrett core 3.5" or bigger, IC kit (all couplers, upper, and lower pipes) and have Mike even anodize it pink! Okay, maybe not the last part.
Last edited by yahu; Jul 29, 2010 at 11:53 PM.
Trending Topics
Jul 30, 2010, 03:07 AM
#8
Evolved Member
Thread Starter
iTrader: (34)
Join Date: Aug 2008
Location: WA
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
^I suppose it depends on how quickly you want to move the stuff. I know that when I've sold ARC stuff I would figure I'd get lowballed to about half, or maybe a bit North of that. E.g. - the Ti sparkplug cover, which is an extremely nice piece, I think it retails for like $350 but I couldn't get a single bite at $200, and certainly not higher. As soon as I hit $175 I had offers all over the place.
The IC might go for more cause it is more rare, but likely (since it is no more functional than an Garrett or other ICs) it may go for even less than half. That one really depends on landing a baller cause only freaks pay $2400, or even half that, for an IC! I am pretty sure for $1200 you can get a Garrett core 3.5" or bigger, IC kit (all couplers, upper, and lower pipes) and have Mike even anodize it pink! Okay, maybe not the last part.
The IC might go for more cause it is more rare, but likely (since it is no more functional than an Garrett or other ICs) it may go for even less than half. That one really depends on landing a baller cause only freaks pay $2400, or even half that, for an IC! I am pretty sure for $1200 you can get a Garrett core 3.5" or bigger, IC kit (all couplers, upper, and lower pipes) and have Mike even anodize it pink! Okay, maybe not the last part.
Jul 30, 2010, 01:43 PM
#9
Evolved Member
iTrader: (11)
Join Date: Jan 2008
Location: Your mamy's bedroom
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
I'd be interested in the catch can and air box..... but dont have what you want for trade.....
PM me if you'd sell them on the side and what you want. I can also throw in some detailing on either of your cars if you want to spruce up the MS3 prior to a sale.
PM me if you'd sell them on the side and what you want. I can also throw in some detailing on either of your cars if you want to spruce up the MS3 prior to a sale.
Aug 1, 2010, 12:25 PM
#12
Evolving Member
iTrader: (10)
Join Date: May 2009
Location: Rainy City, Washington
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
I wish the ARC fit the front Cusco Brace, I'd be interested in trading you then! But too bad it doesn't, so I'll have to live without that ARC piece in my life 