Notices
Mark this thread as Unsold

forced performance fp hta86 gt35r turbo

Thread Tools
 
Search this Thread
 
Old Nov 21, 2011 | 12:31 PM
  #1  
anthonyrb98's Avatar
Thread Starter
Evolving Member
iTrader: (45)
 
Joined: Jan 2007
Posts: 275
Likes: 0
From: wa
forced performance fp hta86 gt35r turbo

decided to stick with my setup.

up for sale - forced performance hta86 turbo, aka gt3586r.

great condition, less than 3000 miles. easy 700+whp!

.82ar, 4 bolt outlet. no shaft play.
$1200 picked up. located in Bremerton, WA.






Last edited by anthonyrb98; Jan 5, 2012 at 11:23 PM.
Old Nov 21, 2011 | 01:09 PM
  #2  
motion3131's Avatar
Newbie
iTrader: (40)
 
Joined: Feb 2010
Posts: 84
Likes: 0
From: Seattle, WA
im running this turbo, and im super happy with it!

bump for you!
Old Nov 21, 2011 | 07:40 PM
  #3  
yahu's Avatar
Evolved Member
iTrader: (55)
 
Joined: Aug 2006
Posts: 3,282
Likes: 0
From: Monroe - WA
om, nom, nom bump!
Old Nov 22, 2011 | 08:16 AM
  #4  
D Grade's Avatar
Evolving Member
iTrader: (27)
 
Joined: Sep 2008
Posts: 271
Likes: 0
From: Tucson, AZ
I think I know who MIGHT pick this up *cough KEITH cough*.
Old Nov 22, 2011 | 06:21 PM
  #5  
anthonyrb98's Avatar
Thread Starter
Evolving Member
iTrader: (45)
 
Joined: Jan 2007
Posts: 275
Likes: 0
From: wa
bumps
Old Nov 22, 2011 | 06:30 PM
  #6  
anthonyrb98's Avatar
Thread Starter
Evolving Member
iTrader: (45)
 
Joined: Jan 2007
Posts: 275
Likes: 0
From: wa
Originally Posted by motion3131
im running this turbo, and im super happy with it!

bump for you!
if you don't mind me asking, what's your setup and what kind of numbers are you putting down?
Old Nov 23, 2011 | 08:37 PM
  #7  
RoninVIIIRS's Avatar
Evolving Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 170
Likes: 0
From: Pah, WA
Where did you get this from? If you don't mind me asking.
Old Nov 24, 2011 | 06:59 AM
  #8  
anthonyrb98's Avatar
Thread Starter
Evolving Member
iTrader: (45)
 
Joined: Jan 2007
Posts: 275
Likes: 0
From: wa
Got it off someone else on the forums, one of buschurs customers.
Old Nov 25, 2011 | 08:53 AM
  #9  
anthonyrb98's Avatar
Thread Starter
Evolving Member
iTrader: (45)
 
Joined: Jan 2007
Posts: 275
Likes: 0
From: wa
to the top
Old Nov 25, 2011 | 04:11 PM
  #10  
motion3131's Avatar
Newbie
iTrader: (40)
 
Joined: Feb 2010
Posts: 84
Likes: 0
From: Seattle, WA
When i put this setup on my car and took it down to english, i ran into little stupid problems on the dyno. Aaron was very helpful fixing all those problems, and he tried to make some good power while the car was there, so i didnt have to leave it at the shop.

On 30psi pump gas with meth i made 570whp. I am taking it down to english again soon, and im sure i can break an easy 600+ on pump meth with more boost, and some new small mods i have.

I am also running 2 resonators in my exhaust which might be affecting power somewhat.

FYI: not thread jacking, but my whole polished T3 kit with this turbo might be for sale since im looking at couple supras.
Old Nov 25, 2011 | 08:00 PM
  #11  
anthonyrb98's Avatar
Thread Starter
Evolving Member
iTrader: (45)
 
Joined: Jan 2007
Posts: 275
Likes: 0
From: wa
Originally Posted by motion3131
When i put this setup on my car and took it down to english, i ran into little stupid problems on the dyno. Aaron was very helpful fixing all those problems, and he tried to make some good power while the car was there, so i didnt have to leave it at the shop.

On 30psi pump gas with meth i made 570whp. I am taking it down to english again soon, and im sure i can break an easy 600+ on pump meth with more boost, and some new small mods i have.

I am also running 2 resonators in my exhaust which might be affecting power somewhat.

FYI: not thread jacking, but my whole polished T3 kit with this turbo might be for sale since im looking at couple supras.
Do u have a built motor? 30 psi is low for the 86 don't u think?
Old Nov 25, 2011 | 11:06 PM
  #12  
motion3131's Avatar
Newbie
iTrader: (40)
 
Joined: Feb 2010
Posts: 84
Likes: 0
From: Seattle, WA
yea i have a fully built 2.0l with a ported head. Like i stated i was having lots of issues on the dyno, so i was satisfied with the numbers due to the fact that i was running out of dyno time. 30psi is low, but i wanted to stay on a safe tune considering im running meth. But now im going e85 so we will see lots more boost when i go back down.
Old Nov 26, 2011 | 05:54 AM
  #13  
anthonyrb98's Avatar
Thread Starter
Evolving Member
iTrader: (45)
 
Joined: Jan 2007
Posts: 275
Likes: 0
From: wa
What kind of issues?
Old Nov 26, 2011 | 02:13 PM
  #14  
anthonyrb98's Avatar
Thread Starter
Evolving Member
iTrader: (45)
 
Joined: Jan 2007
Posts: 275
Likes: 0
From: wa
c'mon guys, this is a great turbo at a great price for all you built motor fools, lol.
Old Nov 28, 2011 | 11:20 AM
  #15  
anthonyrb98's Avatar
Thread Starter
Evolving Member
iTrader: (45)
 
Joined: Jan 2007
Posts: 275
Likes: 0
From: wa
buy the turbo, be happy.



All times are GMT -7. The time now is 01:25 AM.