Going to be upfront about this. Bought it from a local guy because I needed the intake hose hoping to use it with my ARC box. He included an adaptor that he used to run it on an FP Red with 84mm inlet. What he didn't tell me was that he trimmed MAF end of it ~2" shorter to account for the length of the 84mm adaptor on the turbo side.

Therefore, when I took his adaptor off it was too short to reach my ARC box. I could probably have made it work, but my custom IC piping was in the way.

My loss your gain. It's sold as is. I will sell complete for $120 or I will part out if people are interested. The Perrin filter is the old style bigger one. You can see a scratch on the top of it, I ASSURE you it DOES NOT go all the way through to the inside....I think the filter is 2 layers.

Please look at the pictures to see how he attached an ETS silicone hose to fit 84mm turbo's.

Everything else is in great shape.

http://www.flickr.com/photos/jenandfredanderson/7122439731/http://www.flickr.com/photos/jenandfredanderson/7122439731/ by http://www.flickr.com/people/jenandfredanderson/, on Flickr

http://www.flickr.com/photos/jenandfredanderson/6976357510/http://www.flickr.com/photos/jenandfredanderson/6976357510/ by http://www.flickr.com/people/jenandfredanderson/, on Flickr

http://www.flickr.com/photos/jenandfredanderson/7122438397/http://www.flickr.com/photos/jenandfredanderson/7122438397/ by http://www.flickr.com/people/jenandfredanderson/, on Flickr

http://www.flickr.com/photos/jenandfredanderson/7122441669/http://www.flickr.com/photos/jenandfredanderson/7122441669/ by http://www.flickr.com/people/jenandfredanderson/, on Flickr

http://www.flickr.com/photos/jenandfredanderson/7122442541/http://www.flickr.com/photos/jenandfredanderson/7122442541/ by http://www.flickr.com/people/jenandfredanderson/, on Flickr

http://www.flickr.com/photos/jenandfredanderson/6976361998/http://www.flickr.com/photos/jenandfredanderson/6976361998/ by http://www.flickr.com/people/jenandfredanderson/, on Flickr

 

I'm not local; are you willing to ship? If so, how much would you want for the MAF adapter bracket (part that the filter mounts to)?

 

I would actually be interested in the intake tube.