![]() |
emissions testing Evo's
Going to be buying another (new to me) Evo 8 or 9 this summer. Probably will have quite a few mods and may not be emissions legal for King county. So I'm wondering what people have done to get through.
I think they only do the OBDII port scan and not a tail pipe sniffer. What mods have you guys had and passed the test? |
I just took the test tuesday and passed with flying colors. Yes, they just OBDii check it to make sure there are not faults or engine codes as well as making sure all sensors work. No tail sniffer, no dyno. I also JUST put cams in and have a full exhaust.
I was talking to a technician there and he said last year a 70+ year old asain man came through with his "800 hp" red evo and also passed without a problem. So I don't think you will have any problems. |
No check engine light, then you will be fine. That's all that matters
|
Right on, thanks for the info
|
Originally Posted by jnut24
(Post 9920906)
No check engine light, then you will be fine. That's all that matters
Not true. The readiness monitors need to complete their cycles too. If you've recently cleared codes or have a continuing problem, the readiness monitors wont set, and even though the light isn't on, it'll still get you a failure. FYI |
Originally Posted by goucho
(Post 9920880)
I just took the test tuesday and passed with flying colors. Yes, they just OBDii check it to make sure there are not faults or engine codes as well as making sure all sensors work. No tail sniffer, no dyno. I also JUST put cams in and have a full exhaust.
I was talking to a technician there and he said last year a 70+ year old asain man came through with his "800 hp" red evo and also passed without a problem. So I don't think you will have any problems. |
Originally Posted by JohnBradley
(Post 9921874)
I'm not 70.
|
Originally Posted by johnbradley
(Post 9921874)
i'm not 70.
lmfao!!! |
Originally Posted by OfaceGrimmins
(Post 9921468)
Not true. The readiness monitors need to complete their cycles too. If you've recently cleared codes or have a continuing problem, the readiness monitors wont set, and even though the light isn't on, it'll still get you a failure. FYI
|
Originally Posted by jnut24
(Post 9921992)
Yes resetting the code before heading to emissions and have no light on but you will have a pending code for drive cycle incomplete. Would be the end result of doing that, but what I was referring to is if u never had a existing problem that shouldnt apply. I'm emission certified and would know.
|
{thumbup}
Originally Posted by OfaceGrimmins
(Post 9922069)
^^ +2. from an emission certified shop - manager >.< hehehe
|
Originally Posted by R/TErnie
(Post 9921911)
You're also not Asian.
lol Aaron |
Please stop talking about this here! Aarron knows what I mean by this.....it just a matter of time before??? :confused:
|
Aaron.....fat fingers....
|
Originally Posted by jnut24
(Post 9920906)
No check engine light, then you will be fine. That's all that matters
|
| All times are GMT -7. The time now is 09:16 PM. |
© 2026 MH Sub I, LLC dba Internet Brands