Evap Canister Q?
I am hoping someone on here can help a brother out! I am going to start a rear bumper project soon and realized the evap/charcoal canister is right behind the driver rear wheel. I have seen some write ups on removing it but would like to keep it for emissions/environment reasons. Have any of you who may own a Lancer or even an OS re-located this? I am planning on trimming the bumper up a bit and building a lower tube style tire carrier bumper like the front. If I do remove it, I just don't want any engine lights or un able to pass emissions. Thanks!
|
http://www.evoxforums.com/forums/showthread.php?t=63619
I found this writeup but not sure if it applies to the OS. |
Originally Posted by Hamman
(Post 11820905)
I am hoping someone on here can help a brother out! I am going to start a rear bumper project soon and realized the evap/charcoal canister is right behind the driver rear wheel. I have seen some write ups on removing it but would like to keep it for emissions/environment reasons. Have any of you who may own a Lancer or even an OS re-located this? I am planning on trimming the bumper up a bit and building a lower tube style tire carrier bumper like the front. If I do remove it, I just don't want any engine lights or un able to pass emissions. Thanks!
|
Hey mate, thanks for the reply. Sounds good. I will keep you updated. I may try and follow that writeup I linked above even though the pics do not work :(
|
All times are GMT -7. The time now is 10:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands