Precision 1200's:
Scaling - 1044 4.69v - 6.120 7.03v - 3.216 9.38v - 1.968 11.72v - 1.272 14.06v - 0.816 16.41v - 0.504 18.68v - 0.264 It appears the fuel trims have settled to -2.34% low, and +1.75% mid. ------------------------------------------------------------------------------------------ FIC 1100's/I.D. 1000's Scaling - 943 4.69v - 5.640 7.03v - 3.552 9.38v - 2.136 11.72v - 1.344 14.06v - 1.008 16.41v - 0.816 18.68v - 0.696 |
does anyone have the scaling for the delphi 1000cc injectors??
|
Just in case anyone is running the newish FIC 1120's this is what I found worked okay.
Scaling 1044 9.38v - 1.656 11.72v - 1.080 14.06v - 0.912 16.41v - 0.648 Idle ran @ about +4% Cruise @ about +/- 2% Stock fuel pressure (unmeasured) AUDM Evo 8 on Australian 98 |
Here is some of my stuff:
------------------------ FIC 1120 4.872 3.600 2.304 1.632 1.296 1.080 0.840 E85 scaling: 770 -------------------------- Delphi 1000 4.440 3.192 1.800 1.056 0.840 0.576 0.432 E70 scaling: 731 92 scaling: 1008 |
Originally Posted by Lee@Spec-Ops
(Post 9862458)
ID2000s
93oct scaling 1624 latencies (very responsive) is: 9.38- .936 11.72- .672 14.06- .504 16.41- .384 |
Anyone have scaling for ID1300
|
Originally Posted by Benja
(Post 11206560)
Here is some of my stuff:
------------------------ FIC 1120 4.872 3.600 2.304 1.632 1.296 1.080 0.840 E85 scaling: 770 -------------------------- Delphi 1000 4.440 3.192 1.800 1.056 0.840 0.576 0.432 E70 scaling: 731 92 scaling: 1008 |
What scaling and latency do you guys run with id1000 on e85?
|
Start at 590.
|
Originally Posted by MR White
(Post 7841213)
Are there any other side effects of completely disabling leanspool. I'm willing to give it a shot to try and fix my issue. I just want my AFRs spot on. I'm on vaccation right now but will give it a shot when I get back next week and post results. Rescaling stock injectors seems like a bad idea but it somehow fixed the funky afr for nj2166
|
Originally Posted by cdone
(Post 11333703)
How do got disable lean spool. I don't see the option. I'm running tv7 94170715
|
anyone have scaling for Fic 1650 high z , 93 and E85?
|
anybody have any data for id 725 on gas 2.3l? i know a bit small but i am gonna give it a shot.
|
Just got some new FID 1200's, http://www.fuelinjectordevelopment.com/1200.html
Need some ideas for what scaling/latencies to put in for these, for 93 pump gas. |
I have a question, if the injector duty cycle is going 90% , decreasing the scaling would still richen the WOT AFRs ?
|
All times are GMT -7. The time now is 08:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands