sweet...thanks!

how do you know all the part numbers?

I use the program the parts department uses to look them up.

Anyone know the part # for the plastic shifter bracket?

What are the P/N's for the 2005 MR shocks/struts--Front and Rear.

Thanks!

Hey JustDSM how about the oil feed pipe (turbo) banjo bolt and washers where it connects to the head. I'll post a picture if you need it.

I'm still looking for this one. Some reason it's not where it "should" be.. I'll post as soon as I can locate it.

This has been covered before. It should be located in this thread.

Oil feed line: MR266706
Crush washers (turbo side): MF660064
Banjo bolt (turbo side): MS650013
Banjo bolt (head side): MF650102
Crush washers (head side): MF660063

How about the part # for the big long piece of dash right below the windshield? (The one with the vin# plate and defroster vents)

No worries I emailed kartboy and he will have some in stock on Monday. Thanks though

Let us know what you find out!

Garnish, Defroster: MR626743

You rule. {thumbup}
Would you happen to know if the MF660063 is the pair of them or individual part (requires 2)?

I can tell you the Banjo bolt is pretty crappy. At 13 ft lbs it stretched at the feed hole in the sides and started to twist. Defintely requires using the inch lb. torque wrench at 144.

Anytime. :)

The part number will get you one crush washer. You'll have to specifiy 'two'