![]() |
Originally Posted by twentyone
Whats the part # for the suede armrest? Just the top suede part, not the bottom piece that goes around the cup holders and the ebrake. Do they sell the two separately? :confused:
https://www.evolutionm.net/forums/at...id=63134&stc=1 |
Fast reply! :eek:
Thanks! {thumbup} Is that part number ( MR633889 ) just for the suede part? Separate from the bottom plastic portion? |
It gives you the hinge and screws as well. Thats the only way it's sold. It is the suede part and not the lower console.
|
Bypass Valve Hose
1 Attachment(s)
I need to get a new hose for my bypass valve and im wondering what the part number for the hose is or if there's a name for this kind of hose so i can hope into like Autozone or Pep Boys. It's the hose that connects from the I/C pipe to the bypass valve.
Thanks Picture attached |
MR993869 Diverter valve hose
|
is md327654 the part number for the power steering pulley? ($26.17)
do i need the whole assym? it looks like it is pressed on. mine is bent and shaking when the car is on. thanks |
Originally Posted by justchil
PCV valve hose MN158072
PCV Valve MD152772 Ok so I was wrong here.. I got the wrong part in the mail :( I'm looking for the hose that goes from the vavlve cover to the stock intake tube. |
That is the idler pulley for the power steering.
The pulley doesn't look like it's available seperately. Any chance of warrantee on the pump cause they are over $500. http://www.mitsubishiparts.net/cart/...=20&submit.y=5 |
MD377207 Hose, Rocker Cover Breather
|
Forgive me if I overlooked it... The part # for the small silver clamps on the hoses from the intake manifold to the diverter valve. There is a total of six.
Also the part #'s for the negative battery terminal clamp, nut, and bolt. Thanks. |
Anyone knows the part number for the evo8 windshield? I got quoted MR991632 but I am not sure if this is for the lancer or the evo. I understand that the Lancer and evo windshield, altho sharing the same size dimensions, the thickness is different. Please help!!!
|
MR991637 is the Evo glass.
|
Originally Posted by timzcat
MR991637 is the Evo glass.
|
Originally Posted by Thegame
Forgive me if I overlooked it... The part # for the small silver clamps on the hoses from the intake manifold to the diverter valve. There is a total of six.
Also the part #'s for the negative battery terminal clamp, nut, and bolt. Thanks. That is also not listed and I know why. The clamp is part of the cable so you would buy the cable assembly. |
Vacuum hose set from the turbo to wastegate to boost solenoid. Actually, I just need the restristor pill in those lines, but I don't think you can just buy the pill.
Thanks in advance. |
| All times are GMT -7. The time now is 06:08 AM. |
© 2026 MH Sub I, LLC dba Internet Brands