|
Originally Posted by Biggiesacks
(Post 11814913)
Damn thats some carnage. You should post up in the engine failure thread.
Here: https://www.evolutionm.net/forums/ev...ne-thread.html Thanks didnt know this thread existed will put my carnage in there. Did some more cleaning of engine bay. Want to paint it. thinking about some kind of wire tuck. |
Was getting ready for an Auto X when I decided to check the turbo out... 1/4 inch of in/out play on a 1k mile FP HTA71... Well, no auto x for me. |
1 Attachment(s)
|
Swapped out cracked spoolinup carbon plate for a fresh one and decided to clean out the coils and freshen it all up a bit. Also changed out 2 plugs that didn’t look so fresh. Car seems more responsive then before maybe imo. https://cimg0.ibsrv.net/gimg/www.evo...7cafa2e08.jpeg https://cimg8.ibsrv.net/gimg/www.evo...b0f7d34b2.jpeg https://cimg1.ibsrv.net/gimg/www.evo...93f1a202a.jpeg |
Wasn't today, but was this weekhttps://cimg5.ibsrv.net/gimg/www.evo...e232413960.jpg
Injen intake + UICP https://cimg6.ibsrv.net/gimg/www.evo...b8b8c6818e.jpg 2 shops I like now https://cimg9.ibsrv.net/gimg/www.evo...896aa59b4b.jpg small gains = gains |
accidentally double posted, trying to figure out how to delete
|
|
Did an out of state road trip this weekend. On the leg home got 26.8 mpg.
|
Just casually installed our Modena Sequential Gearbox
https://cimg0.ibsrv.net/gimg/www.evo...308e95ff12.jpg |
Gotta my Seibon carbon fiber hood delivered. Finished my battery relocation to the trunk. Finished reinstalling my gauges from taking my dash apart.
|
Redid the headlights. zkw-r lens, blacked out the housings, added angel and demon eyes for the hell of it. https://cimg9.ibsrv.net/gimg/www.evo...9e3b38d178.jpg
|
Went for an alignment. Recently installed Ciro Design Racing Camber/caster plates up front and Blackworks Racing camber arms in the rear. Unfortunately i still need more toe adjustment in the rear so I just ordered a set of adjustable toe arms too. https://cimg4.ibsrv.net/gimg/www.evo...8d0693435.jpeg https://cimg5.ibsrv.net/gimg/www.evo...66e43d643.jpeg |
https://cimg0.ibsrv.net/gimg/www.evo...778c97bf6.jpeg https://cimg1.ibsrv.net/gimg/www.evo...9ffd3cefc.jpeg Replaced nasty old valve cover gasket and swapped in STM Stainless Steel bolt set. |
Originally Posted by Moose_421
(Post 11818197)
https://cimg0.ibsrv.net/gimg/www.evo...778c97bf6.jpeg https://cimg1.ibsrv.net/gimg/www.evo...9ffd3cefc.jpeg Replaced nasty old valve cover gasket and swapped in STM Stainless Steel bolt set. |
Originally Posted by Saltyevo
(Post 11818217)
Looks good. For anyoneathat's interested I did the same thing to my Evo. I swapped all my engine bay bolts with stainless Allen head bolts. I got all of them from bolt deposit.com for like 4$. Way better that getting like the stm sets. I found all the sizes I needed from some old thread on this site I would recommend it to anyone takes like 10 minutes and looks great.
|
| All times are GMT -7. The time now is 02:05 PM. |
© 2026 MH Sub I, LLC dba Internet Brands