I just received my brackets today and installed them about two hours ago and I have to say, these are KICK ASS!! Definitely worth the money!! The seating position is like night and day!

i have installed the binary kit... damn big difference!! {thumbup} but i'm not 100% if i installed it correct as the seats won't slide forward as much so my girl friend cannot reach the pedals... does this sound right to u...

Plans to make these for the evo x?

i think i got a set of these with my seats i bought, but im not sure....

{thumbup} bonus, you should be able to ID them by their looks.

yup. i got a set. i tried to bend them to make them fit a set of sparcos.... but it didnt work.... :(

Has anybody tried these on a regular lancer seat?

Looks like the front will match up....

Ordered these from Binary directly to Switzerland
received one week later which is fast considering the low shipping price

I'm 1m83 tall, that's 6 feet or 72 inches

best quality/price/effect part I have ever bought for my evo !
great change, I got a better driving position I can see my gauges better, am closer to the gear lever, have a better foot position on the left foot-resting thing so am held in position better during spirited driving

and as a bonus by having a slightly lower point of view it feels like my car is going slightly faster lol

thanks Jared for the great brackets, a must buy :)

Installed my binary brackets today. I'm speechless. Best mod I've done. I'm 6'2 and it's soo much more comfortable to drive the car. Everyone needs a set

is there an evom discount on a set of these? if so, please PM me a set shipped to 17407 {thumbup}

I recently revisited the issue with losing the two forward most positions after installing these awesome brackets. The issue is with the rail contacting the top of the stock acorn nuts securing the front brackets. As mentioned previously, open end nuts with washers will eliminate this problem. I didn't see the right size mentioned in ths thread so here it is.

M10x1.25 fine pitch nuts (get the locking ones with the plastic insert and/or use loctite)
M10 washers

These will give you full seat adjustment range for the shorties in your life.

Picking mine up tomorrow from the post office o yeaaaaa

Ordered a set late last night and got a tracking number this morning.
Thanks dude!

Mc- you'll like them if u have'nt already tried them out on a homies car.

Got mine installed this weekend...the seating position is awesome!
Very happy with the product and results so far.
Here is some evidence of how much a difference it made and how I handled the last couple (forward) seating positions.

As you can see, its a very nice drop in seat height...{thumbup}

http://matthew-christian.com/images/evo/binary/1.jpg

http://matthew-christian.com/images/evo/binary/2.jpg

This is how I slightly bent the adjustment bar...
Stood on the ends and pulled up...I had no issues.

http://matthew-christian.com/images/evo/binary/3.jpg

This is the nut that didn't allow complete forward seat adjustment.

http://matthew-christian.com/images/evo/binary/4.jpg

HomeDepot solution...

http://matthew-christian.com/images/evo/binary/5.jpg

http://matthew-christian.com/images/evo/binary/6.jpg

http://matthew-christian.com/images/evo/binary/7.jpg

http://matthew-christian.com/images/evo/binary/8.jpg