|
Bump for a nice writeup it helped a lot.
|
Can anyone post the torque specs?
3x14mm bolts for cross member support 3x17mm blots for cross member 2x14mm bolts for blox 1x through-bolt for blox |
nice diy. just did this mod and notice better response with little to no vibration compare to stock.
|
Very nice and simple write up on that :) Its write ups like this that make forums so useful and helpful to many of the members we have here. I can't tell you mow many times I search the forum or Google (that will 99% of the time lead to this forum) to find tips, tricks and help with questions I don't know or am not sure of. Thank you for taking to time to do this write up :)
Thanks, Dallin |
Originally Posted by november
(Post 10350658)
can anyone post the torque specs?
3x14mm bolts for cross member support 3x17mm blots for cross member 2x14mm bolts for blox 1x through-bolt for blox + 1 !! |
bump ? anyone ?
|
Originally Posted by elim0
(Post 10395754)
bump ? anyone ?
|
|
^no problem elim0
|
Boy does it suck when you do a write up, and 3 years later your pictures go to hell hahaha.
-pal215 - |
Originally Posted by Pal215
(Post 11508386)
Boy does it suck when you do a write up, and 3 years later your pictures go to hell hahaha.
-pal215 - |
Originally Posted by Pal215
(Post 11508386)
Boy does it suck when you do a write up, and 3 years later your pictures go to hell hahaha.
-pal215 - |
Originally Posted by ardevas09
(Post 11508417)
the important thing is that you tried :)
|
Originally Posted by Kreeker
(Post 11508458)
I guess you still don't have them :crap: ?
|
Did this mod today using ralliart bush,that was pressed in to stock mount.
Thought I would struggle to install,must say very very easy and took 15min from jacking car up to dropping car back down. |
| All times are GMT -7. The time now is 04:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands