|
I also bought mine from Evasive and they are really good at shipping it quickly
|
+2 for Evaisive Motorsports, odered mine this past Monday, should be here tomorrow. Thanks Evaisive!
|
ok now the pics dont show!! :(
|
Which pics? The ones from the OP is still showing for me...
|
2 Attachment(s)
Installed my boost gauged per the directions in this thread.
Here are the pics before and after Attachment 298839 Attachment 298840 |
Looks good JJ. you want to do mine next!?
|
Sure, tell me when!
|
awesome
|
Nice writeup, looks sweet also.
|
Finally some body else putting the boost gauge on the left side! GJ JDW1479, looks clean
|
Nice to see my write-up being used {thumbup} Good Jobs :D
|
I saved this linky,great job and awesome write up/pix.I have yet to install my Boost Gauge. I want the same BG as you installed and would like it just left off center like shown (just like my old STi).
|
^ If you use this write up, you will have no problems at all! I'm sure you can't wait to install yours {thumbup}
|
sweet i juss got my mr and i'll be using this write up!!!
|
Originally Posted by RREvoX08
(Post 6220702)
i just ran a very small wire from the boost controller through the stearing wheel well to the light switch with a clamp connector
:rolleyes: Theres no hole behind the stearing wheel well, just a solid metal sheet with the stearing pole pointing downward into the bottom of the drivetrain. I had to buy extra long tubeing and wire to run this boost guage. I remeber on my VIII it was so easy just tap into the headlight wire and run the boost hose behind the glove box and wallah a little hole behind the intake mani. 30 mins tops, this install is takeing me weeks to do. :rant: |
| All times are GMT -7. The time now is 02:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands