Mark this thread as Unsold
2004 Evo , Raly red ( Mint)
#1
Newbie
Thread Starter
iTrader: (6)
Join Date: May 2004
Location: Florida
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
2004 Evo , Rally red $25,000 !!!!!!!!!!!
It is a 2004 with the big wing and has 5220 miles , it's been babied so much. It has ben waxed twice a month and garaged kept. All oils were changed at 1800 miles , then twice since. It has never been smoked in and even never driven in the rain , ( Got lucky)
The only mods are Fujitsubo exhaust for less than a 1000 miles and window tint, I have the stock one also.
I have never shifted it hard or dropped the clutch.
There is not one scratch or chip anywhere, it is mint.
It is close to brand spanking new as it gets, but with more wax and broken in...
Give me some offers before I go to carmax, I paid $29,995 in June 2004, E-mail for any pix .
Thanks, John ( I am in Florida)
The only mods are Fujitsubo exhaust for less than a 1000 miles and window tint, I have the stock one also.
I have never shifted it hard or dropped the clutch.
There is not one scratch or chip anywhere, it is mint.
It is close to brand spanking new as it gets, but with more wax and broken in...
Give me some offers before I go to carmax, I paid $29,995 in June 2004, E-mail for any pix .
Thanks, John ( I am in Florida)
Last edited by lhtevo; Oct 27, 2004 at 09:15 PM.
#4
Newbie
Thread Starter
iTrader: (6)
Join Date: May 2004
Location: Florida
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Not sure , I was going to take ride down there and see.
I have some other mods yet to put on the car I will sell also:
DMP 02 housing, 2000deg coating - $225
3" Fujitsubo RM 01A - $550
3" Helix thermal coated down pipe, - $200
SAFC II with' plug and play' harness, - $250
DEPHI gauges built into pod that fits in tray under Heather controls.( No cutting)
JDM tail lights, - $ 250
RMR Carbon fibre spark plug cover - $ 75
Halman boost controller - $ 75
I have some other mods yet to put on the car I will sell also:
DMP 02 housing, 2000deg coating - $225
3" Fujitsubo RM 01A - $550
3" Helix thermal coated down pipe, - $200
SAFC II with' plug and play' harness, - $250
DEPHI gauges built into pod that fits in tray under Heather controls.( No cutting)
JDM tail lights, - $ 250
RMR Carbon fibre spark plug cover - $ 75
Halman boost controller - $ 75
Last edited by lhtevo; Oct 19, 2004 at 05:51 AM.
Trending Topics
#8
Newbie
Thread Starter
iTrader: (6)
Join Date: May 2004
Location: Florida
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
PM Sent,
The Pod is One I made from the CD din that replaces the pocket. I have the DELHI 'D 'gauges in 52mm and white faced ( I planned on While face gauges to match) I have boost, oil temp and EGT. The pocket fits in with the stock screws and the gauges fit tightly in . No chopping at all.
I will take $250 for the gauges and pod , E-mail me for pics of anything.
I also have a DMP O2 housing with the thermal 2000deg coating in black.
The coating is the same as the down pipe , It new and never installed.
$225 + shipping.
The Pod is One I made from the CD din that replaces the pocket. I have the DELHI 'D 'gauges in 52mm and white faced ( I planned on While face gauges to match) I have boost, oil temp and EGT. The pocket fits in with the stock screws and the gauges fit tightly in . No chopping at all.
I will take $250 for the gauges and pod , E-mail me for pics of anything.
I also have a DMP O2 housing with the thermal 2000deg coating in black.
The coating is the same as the down pipe , It new and never installed.
$225 + shipping.
Last edited by lhtevo; Oct 19, 2004 at 05:48 AM.
#11
Newbie
Thread Starter
iTrader: (6)
Join Date: May 2004
Location: Florida
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
OK,,,,hers waht I wrote:
"The only mods are Fujitsubo exhaust for less than a 1000 miles and window tint, I have the stock one also".
All the rest of the parts are new.
I will combo parts together if interested.
"The only mods are Fujitsubo exhaust for less than a 1000 miles and window tint, I have the stock one also".
All the rest of the parts are new.
I will combo parts together if interested.
#14
Evolved Member
iTrader: (10)
I'm not sure what pod you have, but could you email me a pic of it anyways?
email is www.pokster625@aol.com
Thanks
email is www.pokster625@aol.com
Thanks