My Evo 8 build. The Black Mamba
Okay!!! so everything is basically done! The batteries all done and in the trunk. the STM oil cooler is on, the only thing left to do are the gauges which should be 1,2,3. So if everything goes good! Which i hope!!!! then it should be started tomorrow! "WISH ME LUCK" 
Here's a couple more pics.. I still have to put on the cam gear cover, spark plug cover, heat sheild, SS bolt kit and put in the oil catchcan. I also plan on buying a STM coolant tank and power steering reservoir, Green fuellab FPR instead of the Aeromotive FPR so it all goes together better, a Nice aluminum cover for the fuse box and a strutbar.











Also bought a pair of taillights.

Here's a couple more pics.. I still have to put on the cam gear cover, spark plug cover, heat sheild, SS bolt kit and put in the oil catchcan. I also plan on buying a STM coolant tank and power steering reservoir, Green fuellab FPR instead of the Aeromotive FPR so it all goes together better, a Nice aluminum cover for the fuse box and a strutbar.











Also bought a pair of taillights.
UPDATES: the Evo is up and everything seems to be working fine
. THANK THE LORD BABY JESUS! lol. Ricky put it on the Dyno to get it ready for the break in. I pick it up tomorrow and start! I just hope everthing turns out ok.
. THANK THE LORD BABY JESUS! lol. Ricky put it on the Dyno to get it ready for the break in. I pick it up tomorrow and start! I just hope everthing turns out ok.
SHE'S UP AND RUNNING GUYS!!!!!!!
so heres a few pics of her now! this is before i put the stainless steel bolts around the whole bay. I will take better pics tomorrow. I cant do the break in yet because im repainting my hood, front bumper, and trunk so once i finish that up i will be able to start the break in.
I washed and waxed that a$$ today lol. Also put on the new tails and some of the goodies




so heres a few pics of her now! this is before i put the stainless steel bolts around the whole bay. I will take better pics tomorrow. I cant do the break in yet because im repainting my hood, front bumper, and trunk so once i finish that up i will be able to start the break in.
I washed and waxed that a$$ today lol. Also put on the new tails and some of the goodies




Thanks! and nice good luck with it! i actually went to ACE hardware and bought all the bolts i have a ton extra but some are to long. if i didnt get the extra it wouldve only came out to around $30
So guys i dont get to start my break in :/ but i do have 20miles on the motor
. i decided since my car is an 03 and the paint wont last much longer i am going to repaint my whole car instead of just the random pieces. i may keep it TB or go with a white im not sure yet but i will figure it out. She starts getting naked tomorrow
. i decided since my car is an 03 and the paint wont last much longer i am going to repaint my whole car instead of just the random pieces. i may keep it TB or go with a white im not sure yet but i will figure it out. She starts getting naked tomorrow
Here is a few more bad phone shots of her before i start stripping her down! 
Evo and my bro's 3g eclipse "daily driver"






Made 20miles on the brand new engine
A LOT MORE TO GO! lol 



Evo and my bro's 3g eclipse "daily driver"






Made 20miles on the brand new engine




