Notices
For Sale - Engine / Drivetrain / Power Includes exhausts, cams, clutches, flywheels and all other power related components.
Mark this thread as Unsold

FS: Evo X Parts

Thread Tools
 
Search this Thread
 
Old May 10, 2010 | 04:03 PM
  #16  
nikkadanny's Avatar
Evolved Member
iTrader: (31)
 
Joined: Oct 2005
Posts: 2,106
Likes: 1
From: fort worth, tx
you got charged 600 bucks for 100 bucks worth of piping?
Old May 10, 2010 | 05:39 PM
  #17  
REDEVO08's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Mar 2008
Posts: 138
Likes: 0
From: NJ
I paid for the pipping, dual resonators, chrome tip, flanges, and for it to get welded on my car..So yes it cost me 600 bucks Thanks..So make offers on this..
Old May 11, 2010 | 04:00 PM
  #18  
REDEVO08's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Mar 2008
Posts: 138
Likes: 0
From: NJ
ttt
Old May 11, 2010 | 05:40 PM
  #19  
meat_EVO's Avatar
Evolved Member
iTrader: (7)
 
Joined: May 2008
Posts: 587
Likes: 0
From: VaBeach
thats a little steep. might want to bring it down to 200+shipping. Im sure that after piping and mufflers ect it cost 600. But, so many welds, so much flared piping, just does not look like its worth 500 when someone can pay 600 and get a nice new shiney catback exhaust system.

DIY's are not always worth it. I know, I have done 2 DIY exhausts on my evo.
Old May 13, 2010 | 06:50 PM
  #20  
REDEVO08's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Mar 2008
Posts: 138
Likes: 0
From: NJ
need gone make offers
Old May 13, 2010 | 06:51 PM
  #21  
REDEVO08's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Mar 2008
Posts: 138
Likes: 0
From: NJ
must go make offers
Old May 25, 2010 | 06:10 PM
  #22  
REDEVO08's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Mar 2008
Posts: 138
Likes: 0
From: NJ
offers
Old May 25, 2010 | 06:11 PM
  #23  
REDEVO08's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Mar 2008
Posts: 138
Likes: 0
From: NJ
offers
Old May 28, 2010 | 05:08 PM
  #24  
REDEVO08's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Mar 2008
Posts: 138
Likes: 0
From: NJ
come on guys offers
Old May 29, 2010 | 04:49 PM
  #25  
REDEVO08's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Mar 2008
Posts: 138
Likes: 0
From: NJ
FS: Cobb Acessport

I have for sale a used cobb accessport that is in greatshap..It has the latest firmware on it and if not you go right to there page for free and load on it..Also has a custom tune on there..Just flash and go..Unmarried and ready to go..This can also be used with the ralliarts as well..You just need to flash to the ralliart firmware..This works great and I had no issues with it..I will get pictures soon..Asking 550 shipped..LMK
Old May 29, 2010 | 04:50 PM
  #26  
REDEVO08's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Mar 2008
Posts: 138
Likes: 0
From: NJ
offers
Old May 30, 2010 | 12:02 AM
  #27  
Poondoggs's Avatar
Evolving Member
iTrader: (4)
 
Joined: Dec 2007
Posts: 119
Likes: 0
From: Los Angeles CA
Sending you pm.
Old May 31, 2010 | 05:53 AM
  #28  
REDEVO08's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Mar 2008
Posts: 138
Likes: 0
From: NJ
offers
Old May 31, 2010 | 10:36 AM
  #29  
REDEVO08's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Mar 2008
Posts: 138
Likes: 0
From: NJ
ttt
Old May 31, 2010 | 01:44 PM
  #30  
REDEVO08's Avatar
Thread Starter
Evolving Member
iTrader: (10)
 
Joined: Mar 2008
Posts: 138
Likes: 0
From: NJ
FS: Evo X Parts

I need to move all these parts asap so lets make so deals to move these parts..

1. wga - sold

2. Cobb Acessport - sold

3. Custom 3inch Catback dual resonated exhaust

Custom 3inch Catback dual resonated exhaust cost me 600 asking 425..Need to get out of the garage..Buyer pays shipping or pick up..

4. Undertray

I have off my Evo X the one piece under tray that covers the back part of the motor..Goes for over 100 new asking 85 plus shipping

5. Metra dash kit

I have my dash kit for sale if anyone is interested..30shipped

6. McGard Wheel Lugs and Locks in Black

I have 16 McGard Wheel Lugs and 4 Locks in Black used with with the keys..great shape..I paid 120 shipped..Asking 90 plus shipping

7. Rota Torque Rims 18x9.5

I have 4 rota torque rims..One rim was cracked but I bought a brand new one that just cost me 250 alone..So this will include 3 used rims and 1 brand new rims..Asking 900 plus shipping so make offers like to sell local if possible but will ship..The new one isnt pictured but on its way to me..

8. Nankang NS-2 265/35/18

I have 4 Nankang NS-2 265/35/18 used but have a good 85% tread left or more..Used for about 7000miles.one has a plug but hold air no problems..rim not included..Paid almost 500 shipped..Asking 375 plus shipping..let me know..want these gone

9. Evo X Floor Mats

I have my 2 front mats out of my Evo X..Asking 90 shipped and they are in great shape..They look new..LMK

10. Brand New T1R 3inch HFC

Brand New T1R 3inch HFC cost 508 asking 500

11. Axis 18inch Rims and Tires in Gold - $900

For sale Axis rims and tires 5x114.3 bolt pattern..I have four axis lightweight about 20 pounds each, 18 inches , five lug (5x114.3) + 38 offset, it comes with a set of toyo proxes with little tread left and a set of nitto neo gen brand new..About 3 months of us..I also have a second set of 2 toyo proxes included to replace the other tires..Tires are 235/40/18..They where painted gold but look great..These rims are badass

12. Phoenix Gold Amps

I have these used in great shape..Some scratches but works perfect

Phoenix Gold RSd 250.2 - Amplifier - 2-channel..Asking 120 plus shipping

Phoenix Gold - RSD300.1 - 300 Watt RSD Class D Monoblock Amplifier..Asking 200 plus shipping

13. Stock Evo X Springs

I have these used for about 15,000 miles..Make me an offer on these

14. Moleskin for windows

Brand new never used asking 35shipped

15, RR touch up paint pen

Used but alot left in there..paid like 30 asking 15shipped

16. T1R HFC

I have this used and needs to be welded back together..Asking 175 shipped

17. Evo X air box bracket asking 30 shipped

18. DDM tuning HID light set up..These are 55 watt and 8000..Used with a new ballast asking 65 shipped

19. Custom fiberglass box

These needs finished but fits great..About .85 space..Asking 200 with the mold that made this

20. Stock flywheel

About 25000 on it asking 45 shipped


21 Spec 1 pressure plate

about 25000 on it asking 45 shipped




http://i40.tinypic.com/ohtsur.jpg
http://i43.tinypic.com/2r4[IMG]http:...;/IMG]kl6d.jpg

http://img221.imageshack.us/img221/5...c00012v.th.jpg
http://img59.imageshack.us/img59/1335/dsc00010wc.th.jpg
http://img266.imageshack.us/img266/1...00011ft.th.jpg
http://img218.imageshack.us/img218/5...c00017c.th.jpg

























Last edited by REDEVO08; Jun 10, 2010 at 08:16 PM.



All times are GMT -7. The time now is 04:12 PM.