Hey everyone,

I have for sale a brand new Perrin PWI-2 kit, it has been opened but never installed.

• Progressive delivery of water/methanol mixture giving a consistent flow of water at all loads.
• Has both Injector Duty Cycle, and 0-5 volt inputs for sensing load. (Doesn't rely on the common 0-5volt only like most progressive systems, nor does it need an additional RPM hookup)
• No 150psi limit switch constantly shutting pump down causing fluctuations in flow. (all systems using Shur-flow pumps have this problem)
• Integrated dash mounted unit showing system functions and adjustments needed for setup.
• High-flow, light action check valve for no flow back and no need for added solenoid. ($50 upgrade with some)
• Priced like a "non-progressive" system, but with 100% progressive-ness.
• Roughly half the install and setup time of other systems.
• Bulkhead fitting for water tank include (not included with many others)
• Pump is half the size of the commonly used Shur-flow pump.
• Includes wire harness for simple installation, only hook-ups are dash harness, power, ground and input signal (no spools of wire, butt connectors, or other connectors needed for installation)
• All hose connections are push-on hose connections, no need for sealant on hoses.

MSRP on this kit is 624.99, perrin has it on sale for $498 I'll let it go for $450 shipped OBO! The original nylon tubing was not long enough for an install in the evo x so I have also included the longer tubing which I bought afterwards.

 

Bump, offer me something reasonable!