Mark this thread as Unsold
FS: COMPLETE turbo setup BIG 35r
Thread Starter
Evolved Member
iTrader: (15)
Joined: May 2006
Posts: 2,208
Likes: 7
From: Birmingham, AL
FS: COMPLETE turbo setup BIG 35r
Turbo manifold (200)
downpipe/Exhaust (200)
TURBO: brg s300 83/75, 1500 miles on it (600)
2 tial MVS wastegates (200 each)
1200 firm +shipping (not cheap)
will include a couple extra pieces for anyone wanting them.
My radiator is in my trunk because of manifold placement. there are a couple other ways to mount a radiator in the engine bay. but i didnt want to do a tucked radiator at the time. dont suggest using the turbo manifold. but if someone wants it.. its for sale. it will be tossed in basement later on if no one wants it. (1200$ piece by itself, selling for 200$)
The manifold is good for all the flanges, including mvs gates. anyone that does there own fabricating could build a new turbo manifold using what it already here.
OTHER STUFF I HAVE FOR SALE:
Main parts for sale right now..
PTE 1200cc injectors (with Intake manifold 200) or injectors only, 250 shipped
Intercooler setup.(specifically) 150
Mishimoto intercooler, with 3 inch intercooling piping from intercooler to TB(upper ICP) with or without BOV, 250 without bov shipped, 400 with bov shipped
Turbo is up for grabs also. borg s300 83/75. (600 shipped)
ARP main studs.(50 w/ purchase of someone else) (not 'really' for sale)
(ACL race bearings also if someone wants them)
Pautar rods (500shipped)
Ross pistons (pending disassembly) (will of coarse need to get new piston rings for you, 100 bucks or so) (300+shipping)
Will sell Full built block, once ive inspected it fully, if someone wants it (1000)
will sell block and head as longblock also. if someone wants it. (will figure out whats wrong with it first, if anything is wrong) (1500)
2 Good blocks. (OEM spec or .20 over) just needs fresh hone depend on what u want. will come with correct main caps in place so no line hone required just a deck and hone for building (150 picked up, or 150+shipping)
1 oem head untouched. fresh rebuild on request (100 +shipping untouched) (300 +shipping fully rebuilt fresh n new) (perfect for anyone with alot of milage on an OEM motor.)
mirage solid rocker arms 50$
mirage intake manifold 100$
level10 full race torque converter (will work in daily use just fine) $350
Fresh rebuilt AUTOmatic trans(40-50 miles on it?) $100+ shipping
Full turbo setup is up for grabs. but i didnt figure anyone would want it because its not exactly easy to use. but if someone wants it. With turbo/wastegates/manifold/exhaust/intercooling piping/bov.. i have a price in mind for that also, pretty cheap compared to what i spent
just pm me.. i can talk via phone or text also
downpipe/Exhaust (200)
TURBO: brg s300 83/75, 1500 miles on it (600)
2 tial MVS wastegates (200 each)
1200 firm +shipping (not cheap)
will include a couple extra pieces for anyone wanting them.
My radiator is in my trunk because of manifold placement. there are a couple other ways to mount a radiator in the engine bay. but i didnt want to do a tucked radiator at the time. dont suggest using the turbo manifold. but if someone wants it.. its for sale. it will be tossed in basement later on if no one wants it. (1200$ piece by itself, selling for 200$)
The manifold is good for all the flanges, including mvs gates. anyone that does there own fabricating could build a new turbo manifold using what it already here.
OTHER STUFF I HAVE FOR SALE:
Main parts for sale right now..
Complete head: (fresh rebuild and decked) 800 shipped
comes with RPW stage 3 turbo cam
RPW springs
AEM cam gear
New valves/retainers
0 miles on rebuilt head.
will come with ARP headstuds and new headgasket also.
comes with RPW stage 3 turbo cam
RPW springs
AEM cam gear
New valves/retainers
0 miles on rebuilt head.
will come with ARP headstuds and new headgasket also.
Custom Intake manifold. (Will come with fuel rail and throttlebody) 800shipped
Will also come with boomba throttle body and evo TPS and pigtail.
Will also come with boomba throttle body and evo TPS and pigtail.
Intercooler setup.(specifically) 150
Mishimoto intercooler, with 3 inch intercooling piping from intercooler to TB(upper ICP) with or without BOV, 250 without bov shipped, 400 with bov shipped
Turbo is up for grabs also. borg s300 83/75. (600 shipped)
ARP main studs.(50 w/ purchase of someone else) (not 'really' for sale)
(ACL race bearings also if someone wants them)
Pautar rods (500shipped)
Ross pistons (pending disassembly) (will of coarse need to get new piston rings for you, 100 bucks or so) (300+shipping)
Will sell Full built block, once ive inspected it fully, if someone wants it (1000)
will sell block and head as longblock also. if someone wants it. (will figure out whats wrong with it first, if anything is wrong) (1500)
2 Good blocks. (OEM spec or .20 over) just needs fresh hone depend on what u want. will come with correct main caps in place so no line hone required just a deck and hone for building (150 picked up, or 150+shipping)
1 oem head untouched. fresh rebuild on request (100 +shipping untouched) (300 +shipping fully rebuilt fresh n new) (perfect for anyone with alot of milage on an OEM motor.)
mirage solid rocker arms 50$
mirage intake manifold 100$
level10 full race torque converter (will work in daily use just fine) $350
Fresh rebuilt AUTOmatic trans(40-50 miles on it?) $100+ shipping
Full turbo setup is up for grabs. but i didnt figure anyone would want it because its not exactly easy to use. but if someone wants it. With turbo/wastegates/manifold/exhaust/intercooling piping/bov.. i have a price in mind for that also, pretty cheap compared to what i spent
just pm me.. i can talk via phone or text also
Last edited by Demon_ni2; May 14, 2012 at 07:16 PM.
