Mark this thread as Unsold
Baller parts FS...lol
Thread Starter
Evolved Member
iTrader: (6)
Joined: Nov 2008
Posts: 564
Likes: 0
From: Jacksonville, FL
Baller parts FS...lol
A few go fast parts FS.
Prices include shipping, and are sold just as described. Feel free to ask any questions...
Exedy Twin Disc- $350
I removed this because I dealt with the wavespring clip breaking on me more than once and I don't think I can get any quicker at removal and reinstallation of a transmission (3 hours start to finish). The discs are currently at 3.7mm and are 5.0mm when new. The only information that I found was someone posting that exedy recommends replacement of the discs at 4.00mm. It is your call, I didn't have any slipping or funky engagement issues, I was just too quick at my 3rd-4th shift and broke the clips.
FIC 2150cc injectors- $600
I removed these injectors when I went back to the FP Red and no longer need this much fuel. They were just returned from FIC with new seals after being flow tested... the sheet is included
AEM Digital 35psi boost gauge- SOLD
I just went to an analog gauge and no longer need this, it has two digits burned out, but you don't notice it after a while
ETS 6262 turbo kit- SOLD!
I can't really say much other than this turbo kit did it's job well. It made 617hp on pump at 30psi and 750hp on E85 at 41psi. No shaft play, there is a nick on the dump tube from the driveshaft making contact once upon a time, but still performs as advertised.
Prices include shipping, and are sold just as described. Feel free to ask any questions...
Exedy Twin Disc- $350
I removed this because I dealt with the wavespring clip breaking on me more than once and I don't think I can get any quicker at removal and reinstallation of a transmission (3 hours start to finish). The discs are currently at 3.7mm and are 5.0mm when new. The only information that I found was someone posting that exedy recommends replacement of the discs at 4.00mm. It is your call, I didn't have any slipping or funky engagement issues, I was just too quick at my 3rd-4th shift and broke the clips.
FIC 2150cc injectors- $600
I removed these injectors when I went back to the FP Red and no longer need this much fuel. They were just returned from FIC with new seals after being flow tested... the sheet is included
AEM Digital 35psi boost gauge- SOLD
I just went to an analog gauge and no longer need this, it has two digits burned out, but you don't notice it after a while
ETS 6262 turbo kit- SOLD!
I can't really say much other than this turbo kit did it's job well. It made 617hp on pump at 30psi and 750hp on E85 at 41psi. No shaft play, there is a nick on the dump tube from the driveshaft making contact once upon a time, but still performs as advertised.
Last edited by EvoX2NR; Aug 8, 2012 at 05:55 AM.
