Looking for the long one that sits behind the cam gears. Bolts up both cams on the head. Pm me if you have one

Thank you!

 

You may struggle to find one as each one is specifically made to match that head. You could look into AMS cam cap and have your machine shop match to your head.

Or buy a used head, probably save you on labor and machine work .

 

I was hoping to find a used one so we would only have to align hone. AMS's cam cap would need to be align bored which requires a smaller tool which we dont have

 

I doubt the AMS cam cap is that far off that it needs boring. Either way your still gonna out quite a bit of matching and labor into matching a cap. You can get used bare heads for $1000 or a built one with AMS cams, upgraded springs and port n polished for $2500 and would be ready to go.

 

the ams cam cap as to be line hone, i did one for a customer and it wasn't even close . line hone is a must.