Mark this thread as Unsold

[FS] Efr 8374

Closed Thread Subscribe

Thread Tools

Search this Thread

Sep 20, 2015 | 02:37 PM

chetrickerman

Thread Starter

Evolved Member

iTrader: (7)

Joined: Dec 2008

Posts: 575

Likes: 1

From: Colorado Springs

Efr 8374

I am selling my EFR 8374 supercore. Nothing wrong with it, just going a little larger. However, it does not include the turbine housing, wastegate actuator, WGA bracket, and the full race BOV cover (it will come with the normal tan colored BOV cover). I attached a pic of what you will be receiving. The compressor housing does have a 90 degree vibrant elbow welded on. I will be including the large 90 degree silicone elbow that goes from the intake to the compressor inlet.

This is perfect to buy if you are someone who is waiting for the boost resource stock frame EFR turbine housing as you can just bolt this supercore right in.

Taken from Treadstone Performance:

Quote:

Each Supercore includes a fully assembled bearing and rotor system along with a complete compressor stage. This includes the compressor stage accessories auch as the CRV and BCSV assembled to the comp cover.

Not included is the turbine housing assembly, turbine housing clamp plate hardware, or wastegate parts.

To build a complete turbo from scratch, the Supercore must be mated with a turbine housing, wastegate bracket kit, wastegate canister, and hardware/installation kit.

$1250 shipped. I will include this turbosmart EFR actuator for $50 extra.

The turbo has around 7k miles on it. Zero shaft play, spools down for about 30 seconds after you shut the car off (sounds awesome). It will be removed from my car in a few days.