Mark this thread as Unsold
03 Lightning Yellow Evolution VIII Part-Out...
03 Lightning Yellow Evolution VIII Part-Out...
2003 Yellow Evo VIII. C.O.D. Title.
I have various parts including a rolling chasis with C.O.D. Title..The car is in perfect condition structurally.
The car was towed behind a tow truck for several miles untill the idiot tow truck driver realized he was towing an AWD car!! Car was totalled out by the Ins. company once they got the bill from the repair shop.
As it sits right now. The engine, trans,T-case are out of the car. Engine has been disassembled for inspection. The tow caused the engine to jump timing, punch a hole in the bellhousing, and crack the T-case housing. Which I have another good housing, just got to switch it out.
Engine was kept at stock bore with AMS CP pistons and Pauter rods. Pistons have some valve contact and scuffing
Head has bent valves, overall ported head is in good condition...having it checked and cleaned up with new components now...
Parts Forsale:
Two transmissions. One has a bad 2nd gear, the other one is fine just has a cracked bellhousing. I called TRE and they said if I sent them the two, I could have a built one in exchange.
Make me an offer for both shipped to your door or to TRE, we need to get this out of storage.
Transfer Case from 03 with factory Diff.
I have a good block ready for machining. Offers...
Stock valves and springs, retainers..also have BC springs and retainers.
Stock intake manifold
Stock exhaust mani
Gato performance Custom/cerm.coated T3/T4 tubular manifold with Tial waste gate and discharge pipe...was used with a 35R, which is gone.
2 stock 03 turbo's/9.8 like new condition
Valve cover
stock cams, HKS 280 cams
Water pump is new, has 300 miles if that on it. Replaced it when we built the motor.
Fidanza Cam gears(silver)
Koyo aluminum radiator with slim fan
pauter rods
BODY PARTS:
Factory Front fenders
Wide front fenders/fiberglass w/carbon fiber panel..these are new
Front fiberglass front bumper..IX look alike, never installed.
Seibon hood and trunk lid, yellow wing
doors, glass.
I have various parts including a rolling chasis with C.O.D. Title..The car is in perfect condition structurally.
The car was towed behind a tow truck for several miles untill the idiot tow truck driver realized he was towing an AWD car!! Car was totalled out by the Ins. company once they got the bill from the repair shop.
As it sits right now. The engine, trans,T-case are out of the car. Engine has been disassembled for inspection. The tow caused the engine to jump timing, punch a hole in the bellhousing, and crack the T-case housing. Which I have another good housing, just got to switch it out.
Engine was kept at stock bore with AMS CP pistons and Pauter rods. Pistons have some valve contact and scuffing
Head has bent valves, overall ported head is in good condition...having it checked and cleaned up with new components now...
Parts Forsale:
Two transmissions. One has a bad 2nd gear, the other one is fine just has a cracked bellhousing. I called TRE and they said if I sent them the two, I could have a built one in exchange.
Make me an offer for both shipped to your door or to TRE, we need to get this out of storage.
Transfer Case from 03 with factory Diff.
I have a good block ready for machining. Offers...
Stock valves and springs, retainers..also have BC springs and retainers.
Stock intake manifold
Stock exhaust mani
Gato performance Custom/cerm.coated T3/T4 tubular manifold with Tial waste gate and discharge pipe...was used with a 35R, which is gone.
2 stock 03 turbo's/9.8 like new condition
Valve cover
stock cams, HKS 280 cams
Water pump is new, has 300 miles if that on it. Replaced it when we built the motor.
Fidanza Cam gears(silver)
Koyo aluminum radiator with slim fan
pauter rods
BODY PARTS:
Factory Front fenders
Wide front fenders/fiberglass w/carbon fiber panel..these are new
Front fiberglass front bumper..IX look alike, never installed.
Seibon hood and trunk lid, yellow wing
doors, glass.
Some pictures of all the parts forsale...
RPS 6 Puck clutch disk/heavy duty pressure plate with Fidanza lightweight billet flywheel...$300.00
Factory OEM fenders perfect...SOLD
Street Concepts 10MM front fenders w/ carbon fiber panel (NEW)SOLD
Street Concepts front bumper (NEW)SOLD
Seibon Carbon fiber hood.. SOLD
Seibon Trunk SOLD
Left and Right HID factory headlamp assemblies with HID bulbs and fog bulbs $600 each
also have doors all the glass, etc.
I have some other little stuff like a Greddy turbo timer, Turbo XS dual stage MBC
Walboro 255, aluminum surge tank for fuel system with the blue fuel hose,Aeromotive fuel pressure regulator with gauge...
RPS 6 Puck clutch disk/heavy duty pressure plate with Fidanza lightweight billet flywheel...$300.00
Factory OEM fenders perfect...SOLD
Street Concepts 10MM front fenders w/ carbon fiber panel (NEW)SOLD
Street Concepts front bumper (NEW)SOLD
Seibon Carbon fiber hood.. SOLD
Seibon Trunk SOLD
Left and Right HID factory headlamp assemblies with HID bulbs and fog bulbs $600 each
also have doors all the glass, etc.
I have some other little stuff like a Greddy turbo timer, Turbo XS dual stage MBC
Walboro 255, aluminum surge tank for fuel system with the blue fuel hose,Aeromotive fuel pressure regulator with gauge...
Last edited by DRFTKNGG; Jun 5, 2008 at 06:41 AM.
i wtb the stock front bumper not the look alike IX shoot me a price shipped to 27406 to a business! Also interesnted in the ash tray and the shift surround piece it sits in. Also interested in passenger side fender is that a shipped price?
Last edited by BaLListic_EVO; Jun 2, 2008 at 05:41 PM.
