Mark this thread as Unsold
FS: CF Patterned Shift Boots - Cheap
Thread Starter
Evolved Member
iTrader: (8)
Joined: Dec 2007
Posts: 1,218
Likes: 2
From: Boise, ID ->>> Concord, CA
FS: CF Patterned Shift Boots - Cheap
Last boots SOLD!
/thread
Hey guys/girls,
I bought some CF patterned vinyl to make a shift boot for a friend & ended up making a few more. The fabric is about 1mm thick & is a charcoal color. It's supposed to be stain resistant & can take some weather/sun abuse since it was originally meant for upholstery for boats. The quality is much, much better over the stock boot. The fit is also perfect, since I did an excellent cutting job
Anyways, I'm selling them for $15 each + shipping (so approximately $20 total). Canadians are welcomed to PM me for shipping quotes as well.
Here are the pics:
LMK if you guys have any questions
/thread
Hey guys/girls,
I bought some CF patterned vinyl to make a shift boot for a friend & ended up making a few more. The fabric is about 1mm thick & is a charcoal color. It's supposed to be stain resistant & can take some weather/sun abuse since it was originally meant for upholstery for boats. The quality is much, much better over the stock boot. The fit is also perfect, since I did an excellent cutting job
Anyways, I'm selling them for $15 each + shipping (so approximately $20 total). Canadians are welcomed to PM me for shipping quotes as well.Here are the pics:
LMK if you guys have any questions
Last edited by kidneythief13; Mar 29, 2009 at 09:02 PM.
Trending Topics
u dont need a manual to have a shift boot 
i know its cheesy but i put one i made on my lancer es (cvt) attached are pics of what it looks like. people who dont know much about cars always think my car is manual 
granted mine is not nearly as good looking as kidneythief's 
but then again i only spent 30 mins making mine
i know its cheesy but i put one i made on my lancer es (cvt) attached are pics of what it looks like. people who dont know much about cars always think my car is manual granted mine is not nearly as good looking as kidneythief's but then again i only spent 30 mins making mine
Thread Starter
Evolved Member
iTrader: (8)
Joined: Dec 2007
Posts: 1,218
Likes: 2
From: Boise, ID ->>> Concord, CA
I only have 5 left!
Also, 2 out of the 5 remaining will be discounted to $10/each + shipping. The reason is that the CF pattern doesn't perfectly line up on either side, which erks me. It wont really be noticeable when installed, but I thought you guys should know. If anyone wants these discounted ones, make sure to let me know that you specifically want them.
Boot 1:
Boot 2:
Also, 2 out of the 5 remaining will be discounted to $10/each + shipping. The reason is that the CF pattern doesn't perfectly line up on either side, which erks me. It wont really be noticeable when installed, but I thought you guys should know. If anyone wants these discounted ones, make sure to let me know that you specifically want them.
Boot 1:
Boot 2:
Last edited by kidneythief13; Mar 27, 2009 at 12:20 PM.
Thread Starter
Evolved Member
iTrader: (8)
Joined: Dec 2007
Posts: 1,218
Likes: 2
From: Boise, ID ->>> Concord, CA
^The install is pretty easy. The hardest part is putting the staples back in, when re-inserting the boot. It's not hard, but takes some patience. The how to I used is here
I'll get pics up w/the trim in them in a few.
I'll get pics up w/the trim in them in a few.