Mark this thread as Unsold
Rexpeed CF dash trim, asst other stuff
Rexpeed CF dash trim, asst other stuff
No price is firm, please feel free to make an offer!
OEM radio. $cost of shipping
TurboXS 3" UICP/LICP. Missing 2x 45 degree couplers, and a couple t-bolt clamps, I can find most of them however. Everything else is included. Bad pic, sorry. It also has a bung welded on from the previous owner for some reason. Very few scratches on the lower portions. $100 shipped. I will split up the parts. $70 shipped for UICP, $35 shipped for LICP.
OEM radio. $cost of shipping
TurboXS 3" UICP/LICP. Missing 2x 45 degree couplers, and a couple t-bolt clamps, I can find most of them however. Everything else is included. Bad pic, sorry. It also has a bung welded on from the previous owner for some reason. Very few scratches on the lower portions. $100 shipped. I will split up the parts. $70 shipped for UICP, $35 shipped for LICP.
Last edited by unitedterra; Dec 9, 2012 at 06:25 AM.
dookie, it comes with the trim, original screws and all the wiring; in essence, what's in the pic plus the screws. It was just unplugged and replaced with the regular storage cubby.
Trending Topics
The gauges come with the dash trim they were originally installed in and the four screws that held it in place. They came with my car and a new cubby was already installed, but I believe that's all you need.
I do, sorry, I completely forgot about that. It'll take a few days for me to get it out and get a replacement drain plug though. Do the non-MR cars have the wiring so I can just unplug the sensor or do I have to trace the wiring all the way back to the dash? My service manual electrical supplement doesn't have anything in it for oil temp sensor.
Last edited by unitedterra; Nov 16, 2012 at 08:06 PM.
The "MR gauge set" was installed by MMNA when the cars got to the US. The sensor is integral with the drain plug, so you need to replace it. They sell drain plugs that will fit at any auto parts store (get a washer as well).
The wiring runs through the inside of the undertray to the inside of the fender liner, crappy zip tied to a body rail inside the passenger side fender, then through a grommet on the passenger side, then just draped under the dash to where the gauges sit.
It will take you 5-15 minutes to remove depending on how familiar you are with the car.
BTW, BUMP for an awesome seller... I had a 2 month ordeal with a crappy set of mirrors that didn't come complete (had the harness clips cut off) with another seller (I finally had to charge-back my credit card and send back what she sent me).
Then when I purchased the mirrors from unitedterra, I got the mirrors in 3 days, and they were exactly as described
Thumbs up for an excellent seller!!!
The wiring runs through the inside of the undertray to the inside of the fender liner, crappy zip tied to a body rail inside the passenger side fender, then through a grommet on the passenger side, then just draped under the dash to where the gauges sit.
It will take you 5-15 minutes to remove depending on how familiar you are with the car.
BTW, BUMP for an awesome seller... I had a 2 month ordeal with a crappy set of mirrors that didn't come complete (had the harness clips cut off) with another seller (I finally had to charge-back my credit card and send back what she sent me).
Then when I purchased the mirrors from unitedterra, I got the mirrors in 3 days, and they were exactly as described
Thumbs up for an excellent seller!!!