I've got a set of kick panels from when I owned my Evo8. I started the fabrication process but never finished as I decided to sell the car. I based them off a set of OEM kick panels to make sure they fit perfect, then aligned a set of 3/4" MDF rings (sized for 5 1/4" drivers), stretched fleece over the structure, and glassed them in place. I also made sure there was plenty of room as to not interfere with driving (No issues at all with your foot or the clutch pedal). This was when I sold the car. They've been in storage ever since and I just came across them. Hopefully someone will pick up where I left off...

To someone looking to upgrade their audio system, this is a great start. You'll need to do some minor trimming, smooth them out (bondo), and wrap them in the material of your choice. Or get them smooth and plasti-dip them...your call. Basically, the alignment and structural parts have already been done for you. I would also recommend using clay against the back of the panel as well to make them as solid as possible.

They're located in Central Phoenix, AZ. Pick them up yourself or have them shipped for $15. I'm looking to get $50obo for them. I'm not on this board too much anymore, so email works better: koolade9@hotmail.com