img width=800 height=600]http://i6.photobucket.com/albums/y233/hyelife/photo20.jpg[/img]

1-Porter Cable 7424 here is a link with more details.
http://www.amazon.com/Porter-Cable-7.../dp/B00004SUQ8

2-Xmt Series products.
1 XMT series Fine Swirl Remover 1
1 Xmt Series Fine swirl Remover 2
1 Xmt Series Pad Cleaner
1 XMT Series Pad Conditioner
http://www.youtube.com/watch?v=NURjFvmDpEc

3- CCS Smart Pads.
2 Cutting Foams 6.5"- Use this pad to apply compounds or polishes to remove severe oxidation, swirls, and scratches. It is the most aggressive and should only be used on oxidized and older finishes. Always follow this pad with an orange or white pad and a fine polish to refine the paint until it is smooth.
2 Blue Finessing Foam 6.5” – This blue foam pad has soft composition for applying glaze, finishing polish, sealants, and liquid waxes. The soft pad has no cut, making it perfect for applying nonabrasive products evenly.
2 Orange Light Cutting Foam - Firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It’s an all around pad that will work on most light to moderate imperfections.
1 White Polishing Foam 6.5"- Less dense foam formula for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so its perfect for pre-wax cleaners.
1 Gray Finishing Foam 6.5" - Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.

I will take trades if local.
Will take Intake systems.
Exhaust
Springs
just email me with your offer.f430s@live.com

Asking 220

 

bump. any takers.