Mark this thread as Unsold
Massive part out...
Our intercooler (built by ETS) is not only huge (26" x 11.5" x 3.5"), it also utilizes the much sought after Spearco bar and plate design which is more efficient and more durable than the tube and fin design used by other intercooler manufacturers. It is just over 40% larger than the stock intercooler and is pressure tested to 35 psi to ensure a leak free life. We took our kit one step further and replaced ALL of the stock intercooler piping with much larger 2.5" steel or stainless steel piping which is all included with the kit at no additional charge. The lower and upper piping flow over 20% and 12% more than factory piping respectively. Not only that, the piping is routed in the shortest distance possible which greatly reduces turbo lag. We didn't want anybody blowing off intercooler pipes so we included SS T-bolt clamps instead of the cheap worm clamps many other manufacturers utilize in their kits.
http://www.horsepowerfreaks.com/pric...s/Intercoolers
replaced ALL of the stock intercooler piping with much larger 2.5" steel or stainless steel piping which is all included with the kit at no additional charge
Whats this mean then.....just curious.
replaced ALL of the stock intercooler piping with much larger 2.5" steel or stainless steel piping which is all included with the kit at no additional charge
Whats this mean then.....just curious.


