Mark this thread as Unsold
***Evo 9 SE Part out part 3 - TONS of stuff - CHEAP!!***
***Evo 9 SE Part out part 3 - TONS of stuff - CHEAP!!***
This is the last part out of my project Evo 9 race car, car has 23k on it, about 19k before these parts came out. I'm relocating soon so all this stuff that's been sitting must go now. Make reasonable offers and they won't be refused! All buyers must pay shipping costs from 32835. Make an offer, make it reasonable considering the part and source, and cover the shipping costs - easy peasy JDM.
NOTE: As i'm sure most of us haven't memorized exactly what the name of every part is, especially when it comes to the special interior panels and such. Easiest way is for you to pull the picture, circle the part in paint, and repost. Otherwise we'll work through the stack via PM. Thanks again Evom!
SHIPPING NOTE: I use ups store to ship. Which means I take the raw part to them and say "box this and ship this here." Which means you get the pack and ship guarantee + ups tracking, so YES you have to pay for the box and bubble wrap or peanuts or what have you. So if it's large and long, like say the hood vent, the box that size is around 8 bucks. If you would like me to wrap it in duct tape and give it to a truck driver to drop off, that can be arranged too haha.
In no particular order:
1. Full dashboard including both Pass and Drivers airbags (minus VIN of course)
- All plastics and hardware in, under and around the dash location
- Including clock, hvac controls, oem stereo (no speakers), glovebox, etc etc
2. Interior parts including headliner, plastic mounts for headliner, mounts for handles, seat belts, fully intact retracting motors, etc etc.
3. Full HVAC system including
- Blower
- Heater Core
- all AC lines
- working AC compressor
- acc belt w/ no cracks and no squeaking
4. Front sway end links and OEM turbo/manifold heat shields
5. All 4 door guts including
- All plastics and grips without scratches
- All weather stripping
- All wiring and hardware
- All Glass - intact with 18% tint (no scratches either)!
6. Rear wiper assym. including wiper arm, motor, and oem resistor with electronics
7. Lots of misc trunk area materials including carpets and plastics, rear speaker covers, seatbelts, etc
sold items:
- hood vent
- oem steering wheel and gauge bezel
- oem steering wheel horn ring
NOTE: As i'm sure most of us haven't memorized exactly what the name of every part is, especially when it comes to the special interior panels and such. Easiest way is for you to pull the picture, circle the part in paint, and repost. Otherwise we'll work through the stack via PM. Thanks again Evom!
SHIPPING NOTE: I use ups store to ship. Which means I take the raw part to them and say "box this and ship this here." Which means you get the pack and ship guarantee + ups tracking, so YES you have to pay for the box and bubble wrap or peanuts or what have you. So if it's large and long, like say the hood vent, the box that size is around 8 bucks. If you would like me to wrap it in duct tape and give it to a truck driver to drop off, that can be arranged too haha.
In no particular order:
1. Full dashboard including both Pass and Drivers airbags (minus VIN of course)
- All plastics and hardware in, under and around the dash location
- Including clock, hvac controls, oem stereo (no speakers), glovebox, etc etc
2. Interior parts including headliner, plastic mounts for headliner, mounts for handles, seat belts, fully intact retracting motors, etc etc.
3. Full HVAC system including
- Blower
- Heater Core
- all AC lines
- working AC compressor
- acc belt w/ no cracks and no squeaking
4. Front sway end links and OEM turbo/manifold heat shields
5. All 4 door guts including
- All plastics and grips without scratches
- All weather stripping
- All wiring and hardware
- All Glass - intact with 18% tint (no scratches either)!
6. Rear wiper assym. including wiper arm, motor, and oem resistor with electronics
7. Lots of misc trunk area materials including carpets and plastics, rear speaker covers, seatbelts, etc
sold items:
- hood vent
- oem steering wheel and gauge bezel
- oem steering wheel horn ring
Last edited by Balrok; Feb 3, 2009 at 09:47 AM.
Trending Topics
I see the clock spring, do you have the associated wiring that goes from the clock spring into the dash. I need the clock spring and ALL the wires that attach directly to it. Shipped to 47906. Thanks.
Dan
Dan
. But the wires I can't accurately tell you I have them so assume I don't. I can prolly put that in a UPS bubble envelope so 15 shipped. I'll take another look for the wires though.
do you have the door lock actuators wiring harness. i have a RS that has the factory actuators and i would like to get the harness that plugs into them. let me know price shipped to 31605