Mark this thread as Unsold

Feeler: fully built 2.3 stroker motor

Closed Thread Subscribe

Thread Tools

Search this Thread

May 12, 2009 | 12:07 AM

skatermsmn

Thread Starter

Evolving Member

iTrader: (7)

Joined: Nov 2007

Posts: 202

Likes: 0

From: mn

Feeler: fully built 2.3 stroker motor

I just want to see what I can get for this motor, im thinking about going back to stock. Engine has just under 10k on it. Engine was assembled by Ron at RS Motors. Made over 500hp on 92 octane with 4088r
2.3L
Eagle crank
Manley rods
Wiseco pstons
ACL Race bearings
ARP 11mm head studs
ARP Main studs
Kelford 280 cams
supertech valve springs
supertech valves 1mm oversize, inconel exhaust valves
cometic headgasket

Last edited by skatermsmn; May 12, 2009 at 12:11 AM.

Jan 15, 2010 | 11:23 PM

Levar

Evolved Member

iTrader: (85)

Joined: Nov 2005

Posts: 2,438

Likes: 6

From: Central Texas

I know this thread was created a while ago and I'm just curious to see how the sale turned out. Actually, wondering why you'd return to stock after having such a set up.

Quote:

Originally Posted by skatermsmn

I just want to see what I can get for this motor. I'm thinking about going back to stock. Engine has just under 10K on it. Engine was assembled by Ron at RS Motors. Made over 500hp on 92 octane with 4088r.

2.3L
Eagle crank
Manley rods
Wiseco pstons
ACL Race bearings
ARP 11mm head studs
ARP Main studs
Kelford 280 cams
supertech valve springs
supertech valves 1mm oversize, inconel exhaust valves
cometic headgasket