Mark this thread as Unsold
WTT SA-70 for XD9
Thread Starter
Newbie
Joined: Aug 2006
Posts: 91
Likes: 0
From: mcminnville OR
No spacers at all. Evo dave fender mod up front on widest setting. Took the plastic fender linings out folded the tabs that held them on up front gave the fender a slight I mean slight pull by hand.
Out back had to remove the bumper mount and move it back as far as possible. Shave all the mounting area down smooth. Started off with rolling the lip up flat. Then began to pull the fenders out and after I got them out as far as they would go I started to flare them. I made the 1/4s look look like $h!t so I had to take it to my buddies body shop for him to straighten it out and spray it.
Out back had to remove the bumper mount and move it back as far as possible. Shave all the mounting area down smooth. Started off with rolling the lip up flat. Then began to pull the fenders out and after I got them out as far as they would go I started to flare them. I made the 1/4s look look like $h!t so I had to take it to my buddies body shop for him to straighten it out and spray it.
Thread
Thread Starter
Forum
Replies
Last Post