Brand new in box, Volk CE28RT's in red. Wrong offset for Evo X (Yes I'm stupid. Rays website, when translated, lost its formatting and I misread the comments regarding caliper clearance) so my loss your gain. Asking 2800. Will fit with 3mm spacers but I prefer to not run spacers. Its an aggressive fitment for an STI and I've been told it will clear the VII - IX Brembo's but you should confirm.

 

how is it the wrong offset?

 

He means the wrong offset because he wanted the +22 or lower in order to run them without a spacer up front. The +22 will not clear the 8/9 brembos either but will clear the X. I have never seen +24 in this size so I am curious to see if it will clear the brakes on the 8/9. The +28 ironically will clear the brakes on 8/9 and X.

In this size, the face of the rim is the same for the +15 and +22. The +28 and +34 have less concave.

OP and for anyone looking to buy these... A 3 mm spacer is very small and it does not require longer studs. I ran them before no problem.

This is a great price too for some nice volks... you should post a pic of the angle so people can see the concave on the spokes. I am curious myself as to how they look. If they have the same face as the +22 I would buy these but I am still looking for a X myself and dont want to start buying mods b4 I get the car

Good luck with the sale and bump for you OP

 

I thought anything +22 to +30 fit evo x on 9.5in width?

 

Ill never understand this offset stuff. Makes my brain hurt.

 

astro_train is correct the face of these is more concave than the +28's. they don't clear the brake calipers. You would actually only need a .5mm spacer to clear but brembo recommends 2mm gap between wheel and caliper. Someones coming to pick them up tomorrow but if it falls through ill post some better photos. Also these do have the same face as the +22's so if those don't clear the IX calipers the these wont.