Mark this thread as Unsold
FS at Tuning Technologies: ATP 3037 kit and 1/2 of another
Thread Starter
Evolved Member
Joined: Jan 2004
Posts: 613
Likes: 0
From: Burbank
Originally Posted by statix
It sounds like you need to sell the complete atp kit at a lower price and forget about the half kit, I dont think anyone is going to have any use with two downpipes etc.
A member here sold his atp kit for $1500.00 in under a week...
A member here sold his atp kit for $1500.00 in under a week...
Here's the break down of what I'm offering;
$1600 for kit
or
$1750 w/ IC pipes Samco hoses, and turbo inlet which are not original to the kit
$675 for 1/2 kit
I'll throw in the engine dampner to the first person who buys either kit.
I'm not that far off.
Thread Starter
Evolved Member
Joined: Jan 2004
Posts: 613
Likes: 0
From: Burbank
ATP Kit, Weapon R dampner, IC pipes, Samco Hoses - Sold! 
Still Available - 1/2 kit, Brand new, never used, still in the box. Includes dp w/ O2 housing, midpipe, 2 clamp pipe connectors, dump tube, dump tube clamps, Hanger.
Works with stock exhaust manifold and IC and looks very stock. To the untrained eye, you can not tell there is a kickass turbo kit attached to the engine. Will work with any Garrett profile turbo; 3071, 30R, 35R etc... ..
To make a full kit you can do one of 2 things.
1. Buy turbo, lines, wastegate, IC adapters, hotside from ATP. I had a pm from someone who priced them out at $15xx from ATP.
2. Just buy the hotside from ATP and get the rest of the parts from other sources at a better price. The hotside of the Turbo enables you to bolt up to the stock manifold and use the DP/mid-pipe/dump tube/ Wastegate.
A new kit from ATP costs $2399.
If done right, NEW kit could be build for less than $2k
$675 + shipping
OBO for a fast sale
Still Available - 1/2 kit, Brand new, never used, still in the box. Includes dp w/ O2 housing, midpipe, 2 clamp pipe connectors, dump tube, dump tube clamps, Hanger.
Works with stock exhaust manifold and IC and looks very stock. To the untrained eye, you can not tell there is a kickass turbo kit attached to the engine. Will work with any Garrett profile turbo; 3071, 30R, 35R etc... ..
To make a full kit you can do one of 2 things.
1. Buy turbo, lines, wastegate, IC adapters, hotside from ATP. I had a pm from someone who priced them out at $15xx from ATP.
2. Just buy the hotside from ATP and get the rest of the parts from other sources at a better price. The hotside of the Turbo enables you to bolt up to the stock manifold and use the DP/mid-pipe/dump tube/ Wastegate.
A new kit from ATP costs $2399.
If done right, NEW kit could be build for less than $2k
$675 + shipping
OBO for a fast sale
Last edited by Jaylenospoolboy; Aug 9, 2005 at 11:11 PM.
