Mark this thread as Unsold
FS: TurboSmart E-Boost w/ Gauge pod!
Thread Starter
Evolved Member
iTrader: (6)
Joined: May 2004
Posts: 510
Likes: 0
From: San Antonio, TX.
FS: TurboSmart E-Boost w/ Gauge pod!
BACK FOR SALE!!
I Will End the ebay auction if you make a good offer.
I Will End the ebay auction if you make a good offer.
I am selling my used (9 month old) TurboSmart E-Boost (electronic bc/gauge). This is the version 1, 60psi model. No scratches at all! Works and looks MINT! This is BY FAR the best electronic boost controller on the market IMO... I have no need for it now since I have an AEM EMS, and the aem is now controlling the boost. There are SOOO many features with this. It held boost like a rock, and most importantly, held it steady all the way to redline as programmed. Can be programmed to taper, to go to a certain psi level at a certain RPM..it even has 3 different boost maps, so you can set a valet boost level, race or daily.. or however you want it programmed! You can even set boost levels for each individual gears!
It comes complete with all wiring, hosing, solenoid and added gauge pod (which does not come with it usually). I will email the entire user manual and installation guide after purchase (PDF file)
These go new from $425 and up! Check around! Plus I'm including the gauge pod.
Read the features from the turbosmart website:
The e-Boost is the worlds first re-programmable boost controller utilizing FLASH memory technology, making it compatible with future software upgrades, meaning your e-Boost will never be out-dated. The e-Boost is more than just the best performing electronic boost controller, it is a complete boost management system, making Turbosmart a world leader in boost control systems. This is a boost gauge & boost controller in the same package.
This revolutionary product is loaded with features, squeezed into a package small enough to fit in the palm of your hand: The latest in Hi-tech electronics, featuring a 16 bit RISC based FLASH memory CPU
- faster and smoother boost response Utilizes the latest in surface mount technology
- lighter, smaller and ultra compact Electronics are housed in an anodized billet aluminum alloy housing
- offering durability and reliability in harsh race conditions Programmable gate pressure function to totally eliminate wastegate creep
- you tell the wastegate when to open Three internally or externally activated and individually programmable boost set points Drag racers
- improve your launch, run a different boost in each gear High accuracy boost and vacuum display, readout accurate to within +/- 0.5% of full scale, boost gauge no longer required
- great value Readout can be tailored to suit your needs � display can be configured in KPA, Bar or PSI Easy to read seven segment display with programmable bar graph and glow in the dark buttons Programmable auxiliary output
- e.g. water spray control, water/methanol injection, boost light Programmable audible warning alarm
- excellent for over-boost warning or full boost confirmation Peak hold/Max Boost recall function Revolutionary gauge type construction allows many practical mounting solutions
- 66mm in diameter 55mm long. Suitable for Panel mounting, or in any 2 5/8 inch gauge pod or pillar mounting system.
http://cgi.ebay.com/ebaymotors/ws/eB...MESE%3AIT&rd=1 It comes complete with all wiring, hosing, solenoid and added gauge pod (which does not come with it usually). I will email the entire user manual and installation guide after purchase (PDF file)
These go new from $425 and up! Check around! Plus I'm including the gauge pod.
Read the features from the turbosmart website:
The e-Boost is the worlds first re-programmable boost controller utilizing FLASH memory technology, making it compatible with future software upgrades, meaning your e-Boost will never be out-dated. The e-Boost is more than just the best performing electronic boost controller, it is a complete boost management system, making Turbosmart a world leader in boost control systems. This is a boost gauge & boost controller in the same package.
This revolutionary product is loaded with features, squeezed into a package small enough to fit in the palm of your hand: The latest in Hi-tech electronics, featuring a 16 bit RISC based FLASH memory CPU
- faster and smoother boost response Utilizes the latest in surface mount technology
- lighter, smaller and ultra compact Electronics are housed in an anodized billet aluminum alloy housing
- offering durability and reliability in harsh race conditions Programmable gate pressure function to totally eliminate wastegate creep
- you tell the wastegate when to open Three internally or externally activated and individually programmable boost set points Drag racers
- improve your launch, run a different boost in each gear High accuracy boost and vacuum display, readout accurate to within +/- 0.5% of full scale, boost gauge no longer required
- great value Readout can be tailored to suit your needs � display can be configured in KPA, Bar or PSI Easy to read seven segment display with programmable bar graph and glow in the dark buttons Programmable auxiliary output
- e.g. water spray control, water/methanol injection, boost light Programmable audible warning alarm
- excellent for over-boost warning or full boost confirmation Peak hold/Max Boost recall function Revolutionary gauge type construction allows many practical mounting solutions
- 66mm in diameter 55mm long. Suitable for Panel mounting, or in any 2 5/8 inch gauge pod or pillar mounting system.
Last edited by mobounce; Sep 5, 2005 at 09:45 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
maperformance
Evo 'For Sale' Electronics / Lighting / Audio
591
Mar 6, 2015 07:21 AM
XTR Performance
Evo 'For Sale' Electronics / Lighting / Audio
322
Jun 5, 2013 08:19 AM
EvoXcrzy08
Evo X Engine / Turbo / Drivetrain
2
Sep 14, 2010 12:59 PM
Spinsall4
For Sale/WTB - Engine / Drivetrain / Power
11
Nov 26, 2007 10:34 AM
