Notices
For Sale/WTB - Engine / Drivetrain / Power Includes exhausts, cams, clutches, flywheels and all other power related components.
Mark this thread as Unsold

FEELER: RNR GT35R Kit

Thread Tools
 
Search this Thread
 
Old Sep 4, 2005 | 10:22 AM
  #1  
EvoDaWayToGo's Avatar
Thread Starter
Evolving Member
iTrader: (8)
 
Joined: Feb 2003
Posts: 173
Likes: 0
From: CA
FEELER: RNR GT35R Kit

I'm just looking to see if there's any interest, if so I will be more than happy to sell it.

Asking for $3500 shipped, Let me know if you're interested... PM Me

Here's a little information of what the kit can do....
GT35R w/ Equal length manifold

29 psi, C-16, AEM EMS, 548WHP AND 431WHP on 91 octane

full boost by 4200-4400rpm

10.6 at 123mph

Also, the kit includes the following:
GT Dual Ball Bearing Turbo
304 SS cast 8 gauge manifold
Ram Horn Equal Length style
Jet hot coated manifold
3" SS 02 Elim Downpipe(bolts up to 3" flange)
Tial 38mm Wastgate
SS Dump Tube
2.5" 304SS lower IC pipe w/silicon hoses and T-bolt clamps
AN fittings
SS oil lines
coolant lines
SS bolts, nuts, washers, etc
SS gaskets
hose connectors
everything needed to bolt up to your car

Here's what it looks like...


Kit was used for about 1000 miles or so, but the car has to be parted out... I've been in the process for a while and have decided that this kit must go. I also have a 50 Trim Kit for sale.... Let me know if you're interested....

PM me...

Last edited by EvoDaWayToGo; Sep 10, 2005 at 04:38 PM.
Old Sep 10, 2005 | 04:38 PM
  #2  
EvoDaWayToGo's Avatar
Thread Starter
Evolving Member
iTrader: (8)
 
Joined: Feb 2003
Posts: 173
Likes: 0
From: CA
Bump...
Old Sep 10, 2005 | 04:43 PM
  #3  
evodave's Avatar
Account Disabled
iTrader: (546)
 
Joined: May 2003
Posts: 3,876
Likes: 0
From: driving the 10 second beast in ohio or running lightmods.net
10.6 at 123mph????
Old Sep 10, 2005 | 04:51 PM
  #4  
EvoDaWayToGo's Avatar
Thread Starter
Evolving Member
iTrader: (8)
 
Joined: Feb 2003
Posts: 173
Likes: 0
From: CA
Originally Posted by evodave
10.6 at 123mph????
I didn't hit it, I copied and pasted directly from their site... Here's a direct link...
http://rnrracing.com/cgi-bin/ccp5/cp...tr=HOME:Lancer

You can talk to them about it...

Take Care,
Ed
Old Sep 13, 2005 | 05:12 PM
  #5  
Turbojunkie's Avatar
Evolved Member
iTrader: (21)
 
Joined: Dec 2004
Posts: 1,425
Likes: 0
From: nw
where did you get the 50 trim and how much for that?




All times are GMT -7. The time now is 06:27 AM.