Mark this thread as Unsold
2.3 evo block
2.3 evo block
3500$ shipped, no core.
block used had 4k miles.
stock bore honed with torque plate. Bushur JE pistons 9/1 with hastings rings.Ceramic coated pistons.
NITRIDED crank (best insurance against crankwalk). Eagle rods. Balance shafts eliminated. includes oil pump, but no pan or oil squirters.
I use this piston and ring combo in my dsm 2.4 that runs low tens on a regular basis. The ring seal is second to none. after 15k miles engine has 4% leakdown. no catch can needed running 35psi boost!
e-mail at jerry_dombroski@yahoo.com
block used had 4k miles.
stock bore honed with torque plate. Bushur JE pistons 9/1 with hastings rings.Ceramic coated pistons.
NITRIDED crank (best insurance against crankwalk). Eagle rods. Balance shafts eliminated. includes oil pump, but no pan or oil squirters.
I use this piston and ring combo in my dsm 2.4 that runs low tens on a regular basis. The ring seal is second to none. after 15k miles engine has 4% leakdown. no catch can needed running 35psi boost!
e-mail at jerry_dombroski@yahoo.com
Trending Topics
Do you honestly have nothing better to do then stir up more crap? He is sending the pump back. So, why not just mind your own business and have a nice day. You are taking side because he was the first one to post and most of the things he is posted, he knows nothing about. He also didnt state the fact that they were in the middle of a negiotiation but he didnt bother putting that on here with his complaints. So, before you stir more things into a pot, get the facts first. Jesus, get a clue!
Originally Posted by 4G63Rules
Do you honestly have nothing better to do then stir up more crap? He is sending the pump back. So, why not just mind your own business and have a nice day. You are taking side because he was the first one to post and most of the things he is posted, he knows nothing about. He also didnt state the fact that they were in the middle of a negiotiation but he didnt bother putting that on here with his complaints. So, before you stir more things into a pot, get the facts first. Jesus, get a clue!
this is the same guy who sent me dead denso injectors?? after i got it, i put it in my evo and the car wouldn't start correctly. I took to RC Engineering to test them out. and they told me 2 of them were dead, and other two have an leakage. WTF, this guy should be banned.
Last edited by vboy425; Feb 6, 2006 at 08:53 PM.
talentsearch301 used a mechanic to install this motor. Apparently the mechanic forgot to remove the plug in the pump. He was unable to get any oil pressure even after priming the engine with a preluber. talentsearch301 made a nice thread on how I sent him a bad pump. The pump was sent back so I could inspect.
http://photobucket.com/albums/f397/lancerman/?sc=1
vboy425 was sent a set of injectors that idled fine in my car. they had 20 minutes use on them. he sent them to have them cleaned without my consent, so I didn't pay for the cleaning. a refund would not have been a problem. this is one of those guys that is very difficult to please. I got literally 14 messages and 3 phone calls before I even sold them.
I have 1000 happy transactions and a couple of duds.
http://photobucket.com/albums/f397/lancerman/?sc=1
vboy425 was sent a set of injectors that idled fine in my car. they had 20 minutes use on them. he sent them to have them cleaned without my consent, so I didn't pay for the cleaning. a refund would not have been a problem. this is one of those guys that is very difficult to please. I got literally 14 messages and 3 phone calls before I even sold them.
I have 1000 happy transactions and a couple of duds.
Originally Posted by 94AWDcoupe
talentsearch301 used a mechanic to install this motor. Apparently the mechanic forgot to remove the plug in the pump. He was unable to get any oil pressure even after priming the engine with a preluber. talentsearch301 made a nice thread on how I sent him a bad pump. The pump was sent back so I could inspect.
http://photobucket.com/albums/f397/lancerman/?sc=1
vboy425 was sent a set of injectors that idled fine in my car. they had 20 minutes use on them. he sent them to have them cleaned without my consent, so I didn't pay for the cleaning. a refund would not have been a problem. this is one of those guys that is very difficult to please. I got literally 14 messages and 3 phone calls before I even sold them.
I have 1000 happy transactions and a couple of duds.
http://photobucket.com/albums/f397/lancerman/?sc=1
vboy425 was sent a set of injectors that idled fine in my car. they had 20 minutes use on them. he sent them to have them cleaned without my consent, so I didn't pay for the cleaning. a refund would not have been a problem. this is one of those guys that is very difficult to please. I got literally 14 messages and 3 phone calls before I even sold them.
I have 1000 happy transactions and a couple of duds.
anyway here's the link to another piess off customer.
https://www.evolutionm.net/forums/sh...d.php?t=182450
Last edited by vboy425; Feb 6, 2006 at 09:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
KJS1820
For Sale/WTB - Engine / Drivetrain / Power
0
Nov 5, 2016 11:49 AM
saxon
For Sale/WTB - Engine / Drivetrain / Power
6
May 15, 2016 03:25 PM




