I am asking $175- or I will trade for a used rnr or megan dp + $75

Price includes shipping to lower 48 states.

Actually, this is a older style turbo xs 3" dp designed to be used with their 3" o2 housing which they never produced.

This dp bolts up to the stock o2 housing with the brand new supplied hardware or a 3" o2 housing that utlizes a 3" donut gasket.....cough...cough...WORKS. I also have different bolts/spring assembly that bolts this to the o2 housing. I forgot them @ home, so they're not in the pic.

IF THIS DOESNT FIT THE WORKS o2 housing, I WILL REFUND YOUR MONEY.

Another item not in the picture are lower spacers for the cross bars (~1/4" thick). I dont think spacers will be required when used with the works o2 housing, as you wont be using that intermediate spacer for the donut gasket...



I physically compared this to a WORKS 3"dp pictured @ the top, they are virtually identical.

 

FYI the 3" housing is out now and available.

 

really where can u get the housing

 

Is this a Works Downpipe of a similar design??

 

I had my Works DP net to WOT's Turbo XS DP and there are small variations you can't see from the photo, but they are virtually identical.

 

turbo xs?

 

Actually, this is a older style turbo xs 3" dp designed to be used with their 3" o2 housing which they never produced.

atlvalet-Thanks for your input/confirmation

 

Will it work on a MR?

 

I wonder if this downpipe will work with Works 3" O2 Housing?

 

I am 99% certain it will fit onto the WORKS o2 housing, as turbo xs planned on selling 3" o2 housings with a 3" donut gasket, identical to what WORKS uses.

If it doesnt fit, I will refund your money.

As far as fitting a mr, I am fairly certain it will. Once again, If it doesnt fit, I will refund your money.

Thanks for the interest.

 

I will trade this dp for a rnr or megan racing 3" dp + some cash.

 

So, the inlet size is 3.25 inch? works o2 housing with the gasket becomes 3.25 inch. if that is 3.25 I am interested. I have the megan racing downpipe heat wrapped.

 

No.

Really? The works o2 hosuing that i personally measured was 3" od, ~2.85 i.d feeding into the dp/donut gasket.

 

Really? I think megan has larger diameter than works then.

Edit: that is what works told to everyone that their ID is 3.25. and their o2 housing has 3 inch outlet. And with their gasket, it make 3.25 OD. Hmm... unless what I remember is incorrect.

 

I doubt it. The megan site claims 70mm(2.76") outlet. But of the 2 people who actually have measured the outlet that feeds into the dp, measure roughly 2.5".

I have never measured the outlet diameter feeding into the dp of a megan racing o2 hosuing so I cant say for sure, hopefully today.

the oem o2 hosuing sitting underneath my desk measures ~57mm(2.24").