Mark this thread as Unsold
FS: Profec E-01
FS: Profec E-01
I've got a Greddy Profec E-01 for sale from my personal car.
It can be a little intimidating at first, due to the number of features and the relatively dense documentation. Now that I have it figured out, I've been very happy and impressed with it. With the RPM Offset feature, I've been able to dial in the boost and compensate for the stock turbo and wastegate's tendency to drop boost.
In a third gear pull, the car will hit ~22 PSI and hold ~21 PSI at 7000 RPM. With the RPM Offset off, it would fall to ~18.5 PSI
Some key features:
* RPM Offset - helps compensate for boost falloff
* Peak/hold/warning gauge features
* Displays in multiple units of measure (PSI, BAR, KPa, KG/CM^2)
* Datalogging
* Overboost protection (it can cut solenoid duty cycle if the car goes over a set amount)
* Can be setup to log and display wideband O2 readouts with the optional External Sensor Harness (included with purchase)
I'm looking for $375 shipped. Please PM here or email at jack.thorsen@gmail.com
Thanks!
It can be a little intimidating at first, due to the number of features and the relatively dense documentation. Now that I have it figured out, I've been very happy and impressed with it. With the RPM Offset feature, I've been able to dial in the boost and compensate for the stock turbo and wastegate's tendency to drop boost.
In a third gear pull, the car will hit ~22 PSI and hold ~21 PSI at 7000 RPM. With the RPM Offset off, it would fall to ~18.5 PSI
Some key features:
* RPM Offset - helps compensate for boost falloff
* Peak/hold/warning gauge features
* Displays in multiple units of measure (PSI, BAR, KPa, KG/CM^2)
* Datalogging
* Overboost protection (it can cut solenoid duty cycle if the car goes over a set amount)
* Can be setup to log and display wideband O2 readouts with the optional External Sensor Harness (included with purchase)
I'm looking for $375 shipped. Please PM here or email at jack.thorsen@gmail.com
Thanks!
Last edited by Jack @ EvoStore; Feb 13, 2006 at 06:54 PM.
I forgot to mention that the E-01 can display up to 40 PSI and comes with a Greddy 5-bar pressure sensor. This makes it a great addition to an SAFC because you can tap into the Greddy pressure sensor for the AFC MAP mod. Combine it with a wideband input and you have a great tuning tool without having to bust out (or buy) a laptop.