never installed, need to sell. these were the buschur pistons, will let em go for $425 shipped to lower 48. there are good for both NA and FI guys Wiesco Pistons with rings and all included hardware that normally would come witha Wiesco set.

Aim - Dane11iott
E-mail - Lancer03oz@gmail.com

 

can't remember off the top of my head... but what's our stock ratio again?

 

bump
you're not installing the pistons anymore ?

 

stock is 9.5:1, if you are turbo and want these, RPW makes a decompression gasket (you should already be running higher than 87), if you are NA and want these it will require you to use a 91octane i believe.

Alexandru, i can't afford to install them anymore, i have, in the last 4 weeks, replaced 4 tires, then had a flat on the new tires, then bent the lip on a rim, i also cracked the front end. (the flat, bent lip and frontal damage is from a gynormous pot hole out side my school...) so i gotta fill out paper work to get this all settled or what ever.

 

sorry to hear that dan, so bump for a good local seller !

 

yea, it seems everytime i take the car out anymore it breaks...

 

were these the bushers? or rrm? im not sure. ill keep my eye on this.

 

They are Buschur Piston's cut at wiseco. 10:1 compression ratio. good for a 10whp gain (from what i've herd on here) RPW and RRE sell em for $699. Install varies from $400 - $800 from what i've gathered. I recieved some ones e-mail and replied. Any questions about these with current or future mods, ask away.

RRE is $699 for 9.5:1

RPW is $692 for 9.5:1 thru 11:1

 

lord i wish

 

I will be holding these for a month and then trying to resell. I got a potential buyer and so as of right now they are "on hold" you could say, i will start another thread or update this one if they are not sold by mid june.

 

Do you have rods with these, or just the pistons?

 

just the pistons.

 

Are they still up for grabs?