Notices
For Sale/WTB - Engine / Drivetrain / Power Includes exhausts, cams, clutches, flywheels and all other power related components.
Mark this thread as Unsold

Fs: Many Evo 8 Parts

Thread Tools
 
Search this Thread
 
Old Sep 3, 2007 | 10:19 AM
  #1  
HKSevolutionNYC's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2006
Posts: 138
Likes: 1
From: New York
Fs: Many Evo 8 Parts

FORGE EVO 8 WASTEGATE ACTUATOR...used for 25 miles if that. $175

STOCK EVO 8 TURBO SETUP- PORTED MANIFOLD, TURBO w/ Ported Exhaust Housing 10.5 , and Ebay o2 Housing ported w/ all lines $300 ( 10,000 MILES )


STOCK EVO 8 TURBO (13,000 miles ) $200

STOCK LOWER INTERCOOLER PIPE...MAKE OFFER

AFFTERMARKET LOWER INTERCOOLER PIPE....$60

DEJON UPPER INTERCOOLER PIPE w/ HKS FLANGE...$75

ACT HD STREET CLUTCH w/ Pressure Plate...$300


Last edited by HKSevolutionNYC; Sep 5, 2007 at 04:17 AM.
Old Sep 3, 2007 | 05:15 PM
  #2  
HKSevolutionNYC's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2006
Posts: 138
Likes: 1
From: New York
bump this
Old Sep 3, 2007 | 07:56 PM
  #3  
spooch's Avatar
Evolving Member
iTrader: (4)
 
Joined: May 2007
Posts: 207
Likes: 0
From: Watertown Connecticut
how many launches on clutch
how many miles
Old Sep 4, 2007 | 07:59 AM
  #4  
HKSevolutionNYC's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2006
Posts: 138
Likes: 1
From: New York
maybe 3 or 4 if that i installed it and never got to tune the car. wen i went to tune it the car was breaking up and found out i had a dead cylinder. its got approx 3500 miles on it.
Old Sep 4, 2007 | 06:14 PM
  #5  
plugsnet's Avatar
Newbie
iTrader: (1)
 
Joined: Oct 2005
Posts: 63
Likes: 0
Any pics yet....
Old Sep 4, 2007 | 06:15 PM
  #6  
sharkm87's Avatar
Evolved Member
iTrader: (29)
 
Joined: Jun 2005
Posts: 2,034
Likes: 0
From: Dirty Jerz
what kind of aftermarket LICP is that?
Old Sep 4, 2007 | 06:41 PM
  #7  
bolvangar's Avatar
Newbie
iTrader: (12)
 
Joined: Mar 2007
Posts: 79
Likes: 0
From: DFW
Interested in the type of LICP as well....
Old Sep 4, 2007 | 07:53 PM
  #8  
HKSevolutionNYC's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2006
Posts: 138
Likes: 1
From: New York
pics will be up 2moro
Old Sep 5, 2007 | 04:18 AM
  #9  
HKSevolutionNYC's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2006
Posts: 138
Likes: 1
From: New York
pics posted
Old Sep 5, 2007 | 05:04 AM
  #10  
avengerhed's Avatar
Evolved Member
iTrader: (13)
 
Joined: Sep 2004
Posts: 602
Likes: 0
From: Marlboro, MA
Iterested in the turbo setup with the 10.5 hotside.

was this turbo off of an 05? was it originally a 10.5 hotside or ported to 10.5?

What condition is the turbo in? Shaft play? Damage? I'd like ot offer payment right away if this setup is good to go for a dropin installation on my Evo 8.

Please let me know some more details. Thanks!
Old Sep 5, 2007 | 05:17 AM
  #11  
HKSevolutionNYC's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2006
Posts: 138
Likes: 1
From: New York
Originally Posted by avengerhed
Iterested in the turbo setup with the 10.5 hotside.

was this turbo off of an 05? was it originally a 10.5 hotside or ported to 10.5?

What condition is the turbo in? Shaft play? Damage? I'd like ot offer payment right away if this setup is good to go for a dropin installation on my Evo 8.

Please let me know some more details. Thanks!
came off my 2005 with the original 10.5 hotside. ported that and added the o2 housing and ported that also. the manifold is also ported. but this comes with the stock WG actuator. not the forge one in the pic. if you want it with the forge WG actuator it will be 475$ plus shipping cost for the whole setup. this will run 11s easily
Old Sep 5, 2007 | 06:28 AM
  #12  
avengerhed's Avatar
Evolved Member
iTrader: (13)
 
Joined: Sep 2004
Posts: 602
Likes: 0
From: Marlboro, MA
what's the condition of the turbo? what kind of boost were you running?

any special problems?
Old Sep 5, 2007 | 07:33 AM
  #13  
HKSevolutionNYC's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2006
Posts: 138
Likes: 1
From: New York
turbo is mint, no shaft play at all, ran 25 psi with alky, no problems at all
Old Sep 6, 2007 | 04:08 AM
  #14  
HKSevolutionNYC's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2006
Posts: 138
Likes: 1
From: New York
bump
Old Sep 6, 2007 | 08:36 AM
  #15  
atomicapples's Avatar
Evolving Member
iTrader: (20)
 
Joined: Sep 2005
Posts: 259
Likes: 0
From: New York, NY
who did the porting on the manifold? is the 10.5 hotside ported too? im interested in pickup.



All times are GMT -7. The time now is 03:46 PM.