Mark this thread as Unsold
BB50trim kit
Thread Starter
Evolving Member
iTrader: (13)
Joined: Feb 2005
Posts: 354
Likes: 0
From: Rohnert Park, CA
BB50trim kit
I am selling my 50 trim "starter kit"
I am moving to a larger turbo and i am asking only what i need to cover the new turbo, gaskets and hardware.
$1350
-STARTER KIT-
Garrett/AGP Ball Bearing 50 trim turbo with polished compressor housing, .63 A/R hotside, 4 bolt discharge
Turbonetics cast manifold with all hardware pinned, studs and castle nuts NO LOSE BOLTS
Wastegate discharge tube
Custom 3in stainless o2 housing
Modified Buschur downpipe with 3bolt flanges
-What YOU need to complete the kit-
I will provide you with information/links to everything you need to complete the kit
Gaskets
Oil lines
38mm wastegate
LICP- which can be made very very easily
*You may have to modify the wastegate dump tube to clear a/c ( simple as cutting and changing the angle)
*You will have to reflange you cat or test pipe to match the 3 bolt flange on the down pipe
24.5 psi track map on 110oct





I am moving to a larger turbo and i am asking only what i need to cover the new turbo, gaskets and hardware.
$1350
-STARTER KIT-
Garrett/AGP Ball Bearing 50 trim turbo with polished compressor housing, .63 A/R hotside, 4 bolt discharge
Turbonetics cast manifold with all hardware pinned, studs and castle nuts NO LOSE BOLTS
Wastegate discharge tube
Custom 3in stainless o2 housing
Modified Buschur downpipe with 3bolt flanges
-What YOU need to complete the kit-
I will provide you with information/links to everything you need to complete the kit
Gaskets
Oil lines
38mm wastegate
LICP- which can be made very very easily
*You may have to modify the wastegate dump tube to clear a/c ( simple as cutting and changing the angle)
*You will have to reflange you cat or test pipe to match the 3 bolt flange on the down pipe
24.5 psi track map on 110oct







