Hello All;
Selling this for a friend up in Canada....here is his description. For all inquiries, please direct questions to his email directly (zcmunir@hotmail.com) and I will try to bump the thread. Thanks:







this will come with the evo 8 intake manifold, evo throttle body, evo timing covers, evo coil packs + spark plug wires, rear water pipe, evo cam sensor, 4g64 crank sensor, thermostat housings, and a few other goodies.


this motor is brand new, it has 0 miles on it. it was professionally built by www.mississaugaengines.com, they've built some of the fastest dsm and honda motors in canada. the motor cost me 3800 in machine work only.

it's got a flow benched port and polish job, competition valve job, new seals in the head, valve stem seals, etc. everything's been checked from piston to valve clearance to all the evo 8 spring tensions. nothing has been skipped. fidanza cam gears, brand new timing belt + brand new idler pulley, auto-tensioner, tensioner pulley.

the block has eagle connecting rods, custom pistons spec'ed from road race engineering for 8.3:1 compression and LOTS of piston to valve clearance. oil pan has a oil return tig welded already. arp head studs, deck was properly bored and proper piston to wall clearance was achieved. it was honed using a proper 4g64 torque plate that was custom machined just for the job. the block was align honed for the ARP main studs. federal mogul top of the line bearings were used, cometic 1.5mm custom headgasket made specifically for a 4g64 with a evo head (rare *** gasket!).


this motor cost me roughly 8000$ to build. the reason i am selling it is i REALLY need the money.

Asking for $4300 shipped OBO. serious inquires only....I was planning this for my gt35r to make 700hp. Thanks.

Please send all inquiries to zcmunir@hotmail.com.

 

should of gave a better discription of what is in the head like what cams or retainers, ect? or is everything stock? aluminum or steel rods? it says 5000 plus shipping but right before that it says the price is including shipping? interested in it but how long would it take to get here in the U S?

 

Hello;
Sorry for the ambiguity. I fixed that small part of the thread.....I basically took his sales listing and put it here (he was asking for a higher price including shipping). In terms of the details for the head etc.....please email him directly if you are intersted. Thanks for looking.

 

Revised pricing according to original seller. Bump. Thanks for looking.

 

bump for a good guy

 

I know seller personally and he is stand up guy buy with confidence.