Mark this thread as Unsold
Buschur high pressure wga
Can you please post some more pictures? For some reason your WGA appears to be different than the one on BR's site (yours looks stock)? Or post a video showing the wga opening at 22psi ??
Thread Starter
Evolving Member
iTrader: (9)
Joined: Jun 2008
Posts: 126
Likes: 0
From: Parkville, MO
I swear this is a high pressure wastegate. Whoever buys this I will give them my address and phone number and if it's not a high pressure then they can come to my house and beat me up haha.
It looks like this wastegate
http://store.forcedperformance.net/m...Lancer-TurboHW
but instead it's brass.
The only way you can tell it's not a stock wastegate is because it doesn't have a machined hole on the same surface as the nipple like all the stock wastegates. Also I don't even think the stock 9 wastegate I pulled off was adjustable. If you ever have warranty work done it's one less thing you have to take off.
Also this wastegate will only work with an Evo 9 turbo. I tried installing it on my 2000 Eclipse which has a full Evo 8 motor and trans swap and the arm is too long. The only way the wg arm can go on the flapper is if the flapper is like halfway open. So Evo 9 turbos only....
It looks like this wastegate
http://store.forcedperformance.net/m...Lancer-TurboHW
but instead it's brass.
The only way you can tell it's not a stock wastegate is because it doesn't have a machined hole on the same surface as the nipple like all the stock wastegates. Also I don't even think the stock 9 wastegate I pulled off was adjustable. If you ever have warranty work done it's one less thing you have to take off.
Also this wastegate will only work with an Evo 9 turbo. I tried installing it on my 2000 Eclipse which has a full Evo 8 motor and trans swap and the arm is too long. The only way the wg arm can go on the flapper is if the flapper is like halfway open. So Evo 9 turbos only....
Last edited by speedypollard; Jul 12, 2009 at 12:52 PM.
