Mark this thread as Unsold
FS: Tanabe DP- 2.75" fits all models.
FS: Tanabe DP- 2.75" fits all models.
Selling my Tanabe 2.75" DP. 2.75" is rated to support to somewhere around 600hp (crank rating I believe) so I had to upgrade to a 3" . These things go for $$$$$ brand new now a days with our economy in the tank. It's black high temp coated and already has an O2 bung welded in. Looking for $200+actual shipping.
Bump
If your not sure what these are costing now-a-days here are some links:
http://www.lancershop.com/customer/p...?productid=621
http://www.speedelement.com/index.ph...mart&Itemid=38
http://www.horsepowerfreaks.com/part...ownpipes//1305
If your not sure what these are costing now-a-days here are some links:
http://www.lancershop.com/customer/p...?productid=621
http://www.speedelement.com/index.ph...mart&Itemid=38
http://www.horsepowerfreaks.com/part...ownpipes//1305
Trending Topics
^^ I am aware, thanks for the negativity but 3" is not always better.
Not all "cheapy" 3" dp's will clear the acd on '05-'06 cars or they will make you add spacers to fit your lower brace bars back on.
This pipe fits without making any of those accomidations AND if you research, you'll find that there is a benefit of increased torque with the 2.75" over the 3" as long as your within the flow range of the 2.75".
Not all "cheapy" 3" dp's will clear the acd on '05-'06 cars or they will make you add spacers to fit your lower brace bars back on.
This pipe fits without making any of those accomidations AND if you research, you'll find that there is a benefit of increased torque with the 2.75" over the 3" as long as your within the flow range of the 2.75".
