SOLD

I'll consider parting it out but first let me see if anyone wants it as a whole. This exhaust will connect to any 2 bolt flange downpipe thats similar to stocker. Example: Buschur, Megan, Turbo XS, Tanabe etc... Basically most that you can run the stock cat on.

Realize that I removed the metal heat sheild for the catalytic converter. I'm not sure if the muffler will clear with that shield still in place. The entire catback is unmodified buscher exhaust. All I did was create a test pipe with muffler to adapt to buschurs catback. So if you just want to run the catback with buschurs cat, testpipe etc.. it will attach with no problems.


Here are pictures and Video/sound clips:

Idle, rev to 2-2.5k and drive off.
http://s169.photobucket.com/albums/u...t=MOV01355.flv

Normal driving and comparing to sound system.
http://s169.photobucket.com/albums/u...t=MOV01357.flv

WOT 1-2-3
http://s169.photobucket.com/albums/u...t=MOV01358.flv

More normal driving a bit of traffic.
http://s169.photobucket.com/albums/u...t=MOV01359.flv

2-step set at 5750 rpms
http://s169.photobucket.com/albums/u...t=MOV01360.flv

6" Magnaflow muffler. You can see that one side is 2 bolt flange and the other slip fit.






Both mufflers from the rear view:

 

All PM's replied to.
Here are some pictures of it off the car now. Clamps/hanger hardware is also included just not pictured.

 

Bump

 

Back to 1st page.

 

how much are you trying to get for the center muffler w/ clamp?

 

I dont want to separate just yet. But probably 100 shipped?

 

Please let me know if you ever decide to seperate... very interested.